Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.2-RC2 #1: Sun Feb 6 05:06:03 UTC 2011 root@:/usr/obj/usr/src/sys/GENERIC amd64 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz (2389.26-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x1067a Family = 6 Model = 17 Stepping = 10 Features=0xbfebfbff Features2=0x408e3fd AMD Features=0x20100800 AMD Features2=0x1 TSC: P-state invariant real memory = 4294967296 (4096 MB) avail memory = 3813187584 (3636 MB) ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 1 ioapic0 irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: on motherboard acpi0: [ITHREAD] acpi_ec0: port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) unknown: I/O range not supported acpi_hpet0: iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 Timecounter "HPET" frequency 25000000 Hz quality 900 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: on acpi0 cpu1: on acpi0 acpi_acad0: on acpi0 acpi_lid0: on acpi0 acpi_button0: on acpi0 acpi_button1: on acpi0 pcib0: on acpi0 pci0: on pcib0 pci0: at device 0.1 (no driver attached) pci0: at device 1.0 (no driver attached) pci0: at device 1.1 (no driver attached) pci0: at device 1.2 (no driver attached) pci0: at device 1.3 (no driver attached) pci0: at device 2.0 (no driver attached) pci0: at device 2.1 (no driver attached) isab0: port 0x2100-0x21ff at device 3.0 on pci0 isa0: on isab0 pci0: at device 3.1 (no driver attached) pci0: at device 3.2 (no driver attached) pci0: at device 3.3 (no driver attached) pci0: at device 3.4 (no driver attached) ohci0: mem 0xd348a000-0xd348afff irq 18 at device 4.0 on pci0 ohci0: [ITHREAD] usbus0: on ohci0 ehci0: mem 0xd348b100-0xd348b1ff irq 19 at device 4.1 on pci0 ehci0: [ITHREAD] usbus1: EHCI version 1.10 usbus1: on ehci0 ohci1: mem 0xd3489000-0xd3489fff irq 20 at device 6.0 on pci0 ohci1: [ITHREAD] usbus2: on ohci1 ehci1: mem 0xd348b000-0xd348b0ff irq 21 at device 6.1 on pci0 ehci1: [ITHREAD] usbus3: EHCI version 1.10 usbus3: on ehci1 pci0: at device 8.0 (no driver attached) atapci0: port 0x2298-0x229f,0x22a4-0x22a7,0x2290-0x2297,0x22a0-0x22a3,0x2280-0x228f mem 0xd3484000-0xd3485fff irq 23 at device 10.0 on pci0 atapci0: [ITHREAD] ata2: on atapci0 ata2: [ITHREAD] ata3: on atapci0 ata3: [ITHREAD] pci0: at device 11.0 (no driver attached) pcib1: at device 14.0 on pci0 pci1: on pcib1 pcib2: at device 21.0 on pci0 pci2: on pcib2 pci2: at device 0.0 (no driver attached) pcib3: at device 22.0 on pci0 pci3: on pcib3 bge0: mem 0xd3100000-0xd310ffff irq 17 at device 0.0 on pci3 bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E miibus0: on bge0 brgphy0: PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Ethernet address: 10:9a:dd:5c:5c:c2 bge0: [FILTER] pcib4: at device 23.0 on pci0 pci4: on pcib4 vgapci0: port 0x1000-0x107f mem 0xd2000000-0xd2ffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 18 at device 0.0 on pci4 battery0: on acpi0 atrtc0: port 0x70-0x77 on acpi0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd: unable to get the current command byte value. atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to get the current command byte value. ppc0: cannot reserve I/O port range est0: on cpu0 p4tcc0: on cpu0 est1: on cpu1 p4tcc1: on cpu1 RTC BIOS diagnostic error ff Timecounters tick every 1.000 msec ohci_interrupt: resume detect ohci_interrupt: blocking intrs 0x8 ohci_interrupt: resume detect ohci_interrupt: blocking intrs 0x8 md0: Preloaded image 4194304 bytes at 0xffffffff80ea05d0 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 ad4: DMA limited to UDMA33, device found non-ATA66 cable ad4: 115712MB at ata2-master UDMA33 ata3: timeout waiting for read DRQ ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 ugen2.1: at usbus2 uhub2: on usbus2 ugen3.1: at usbus3 uhub3: on usbus3 ata3: timeout waiting for read DRQ acd0: DMA limited to UDMA33, device found non-ATA66 cable acd0: DVDR at ata3-master UDMA33 SMP: AP CPU #1 Launched! uhub0: 6 ports with 6 removable, self powered uhub2: 6 ports with 6 removable, self powered uhub1: 6 ports with 6 removable, self powered uhub3: 6 ports with 6 removable, self powered ugen1.2: at usbus1 umass0: on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x0000 ugen3.2: at usbus3 umass1: on usbus3 umass1: SCSI over Bulk-Only; quirks = 0x0000 umass0:0:0:-1: Attached to scbus0 acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI status: Check Condition (probe0:umass-sim0:0:0:0): SCSI sense: UNIT ATTENTION asc:28,0 (Not ready to ready change, medium may have changed) da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 da0: Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: 1920MB (3932160 512 byte sectors: 255H 63S/T 244C) ugen1.3: at usbus1 umass1:1:1:-1: Attached to scbus1 (probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim1:1:0:0): CAM status: SCSI Status Error (probe0:umass-sim1:1:0:0): SCSI status: Check Condition (probe0:umass-sim1:1:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) da1 at umass-sim1 bus 1 scbus1 target 0 lun 0 da1: Removable Direct Access SCSI-0 device da1: 40.000MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present ugen2.2: at usbus2 ukbd0: on usbus2 kbd2 at ukbd0 uhid0: on usbus2 ums0: on usbus2 ums0: 3 buttons and [XY] coordinates ID=2 ugen2.3: at usbus2 uhid1: on usbus2 ugen2.4: at usbus2 uhub4: on usbus2 acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 uhub4: 3 ports with 0 removable, self powered ugen2.5: at usbus2 ugen2.6: at usbus2 ukbd1: on usbus2 kbd3 at ukbd1 ugen2.7: at usbus2 ums1: on usbus2 ums1: 3 buttons and [XY] coordinates ID=2