carrier image

1991 Publications

 Papers related to mesh generation published during 1991.

MESHING
RESEARCH
CORNER

Aurenhammer, Franz

    "Voronol Diagrams -A Survey of a Fundamental Geometric Data Structure", ACM Computing Surveys, ACM, Vol 23, Num 3, pp.345-405, September 1991
    keywords:
    • Voronoi
      		•
    • bibliography
    Abstract

Blacker T.D., M.B. Stephenson and S. Canann
    "Analysis automation with paving: A new quadrilateral meshing technique", Advances in Engineering Software, Elsevier, Vol 56, Num 13, pp.332-337, 1991
    keywords:
    • finite elements
      		•
    • paving
    • two-dimensional
      		•

Blacker, Ted D.
    "Paving: A New Approach To Automated Quadrilateral Mesh Generation", International Journal For Numerical Methods in Engineering, John Wiley, Num 32, pp.811-847, 1991
    keywords:
    • finite elements
      		•
    • paving
    Abstract

Brown J.L.
    "Vertex based data dependant triangulations", Computer Aided Geometric Design, North-Holland, Num 8, pp.239-251, 1991
    keywords:
    • data-dependant triangulation
      		•
    • triangulation
    • two-dimensional
      		•

Cavendish J.C., W.H. Frey and S.P. Marin
    "Feature-Based Design and Finite Element Mesh Generation For Functional Surfaces", Advances in Engineering Software, Elsevier, Vol 13, Num 5, pp.226-237, 1991
    keywords:
    • Delaunay
      		•
    • finite elements
    • surface mesh
      		•
    • surface patches
    • triangulation
      		•
    • two-dimensional
    Abstract

Dannenhoffer, John F. III
    "A Block-Structuring Technique for General Geometries", 29th Aerospace Sciences Meeting & Exhibit, Reno, NV, AIAA-91-0145, January 1991
    keywords:
    • block structuring
      		•
    • mapped meshing
    Abstract

Dannenhoffer, John F. III
    "Computer-Aided Block-Structuring Through the Use of Optimization and Expert System Techniques", AIAA 10th CFD Dynamics Conference, Honolulu, Hawaii, AIAA-91-1585, June 1991
    keywords:
    • block structuring
      		•
    • mapped meshing
    Abstract

Dey, Tamal K., Chanderjit L. Bajaj and Kokichi Sugihara
    "On Good Triangulations in Three Dimensions", ACM, ACM, pp.431-441, 1991
    keywords:
    • convex hull
      		•
    • quality
    • shape measures
      		•
    • tetrahedron
    Abstract

Farouki, Rida T. and Takis Sakkalis
    "Real Rational Curves are not `Unit Speed'", Computer Aided Geometric Design, Elsevier, Vol 8, pp.151-157, 1991
    keywords:
    • geometry management
      		•
    • NURBS
    • paramaterization
      		•
    • surface
    Abstract

Field, D.A.
    "A Generic Delaunay Triangulation Algorithm for Finite Element Meshes", Advances in Engineering Software, Elsevier, Vol 56, Num 13, pp.263-272, 1991
    keywords:
    • Delaunay
      		•
    • finite elements
    • triangulation
      		•
    Abstract

Frey, William H. and David H. Field
    "Mesh relaxation: A new Technique for Improving Triangulations", International Journal For Numerical Methods in Engineering, Vol 31, pp.1121-1133, 1991
    keywords:
    • refinement
      		•
    • relaxation
    • triangle
      		•
    • two-dimensional

George, P.L.
    "Automatic Mesh Generation: Application to Finite Element Methods", Wiley, pp.333, 1991
    keywords:
    • advancing front
      		•
    • Delaunay
    • mapped
      		•
    • mulit-block
    • octree
      		•
    • overview
    • surface meshing
      		•
    • Voronoi
    Abstract

George, P.L., F. Hecht and E. Saltel
    "Automatic Mesh Generator with Specified Boundary", Computer Methods in Applied Mechanics and Engineering, North-Holland, Vol 92, pp.269-288, 1991
    keywords:
    • boundary-constrained
      		•
    • Delaunay
    • tetrahedron
      		•
    • triangle
    • Voronoi
      		•
    Abstract

George, P.L., F. Hecht and M.G. Vallet
    "Creation of Internal Points in Voronoi's Type Method. Control Adaptation", Advances in Engineering Software, Elsevier, Vol 13, Num 5, pp.303-312, 1991
    keywords:
    • finite elements
      		•
    • point creation
    • tetrahedron
      		•
    • triangles
    • Voronoi
      		•

Gursoy, H.N. and N.M. Patrikalakis
    "Automated Interrogation and Adaptive Subdivision of Shape Using Medial Axis Transform", Advances in Engineering Software, Elsevier, Vol 56, Num 13, pp.287-302, 1991
    keywords:
    • finite elements
      		•
    • medial axis transform

Hinton, E., N.V.R. Rao and M. Ozakca
    "Mesh Generation With Adaptive Finite Element Analysis", Advances in Engineering Software, Elsevier, Vol 13, Num 5, pp.238-262, 1991
    keywords:
    • adaptivity
      		•
    • finite elements
    • two-dimensional
      		•

Joe, B.
    "GEOMPACK - A Software Package for the Generation of Meshes Using Geometric Algorithms", Advances in Engineering Software, Elsevier, Vol 13, Num 5, pp.325-331, 1991
    keywords:
    • Delaunay
      		•
    • software
    • tetrahedron
      		•
    • three-dimensional
    • two-dimensional
      		•

Joe, Barry
    "Delaunay Versus Max-Min Solid Angle Triangulations For Three-Dimensional Mesh Generation", International Journal for Numerical Methods in Engineering, John Wiley & Sons, Vol 31, pp.987-997, 1991
    keywords:
    • angle
      		•
    • Delaunay
    • max-min solid angle
      		•
    • tetrahedron
    • three-dimensional
      		•
    Abstract

Joe, Barry
    "Construction of Three-Dimensional Delaunay Triangulations Using Local Transformations", Computer Aided Geometric Design, Elsevier Science Publishers (North-Holland), Num 8, pp.123-142, 1991
    keywords:
    • Delaunay triangulation
      		•
    • scattered data
    • tetrahedron
      		•
    • three-dimensional
    • triangulation
      		•
    Abstract

Joe, Barry
    "GEOMPACK - A Software Package for the Generation of Meshes Using Geometric Algorithms", Adv. Eng. Software, Elsevier, Vol 13, Num 5, pp.325-331, 1991
    keywords:
    • Delaunay
      		•
    • tetrahedron
    • triangle
      		•

Johnston, Bruce P., John M. Sullivan, Jr. and Andrew Kwasnik
    "Automatic Conversion of Triangular Finite Element Meshes to Quadrilateral Elements", International Journal for Numerical Methods in Engineering, Wiley, Vol 31, pp.67-84, 1991
    keywords:
    • quadrilateral
      		•
    • triangle conversion
    Abstract

Jones, Norman L. and Stephen G. Wright
    "Algorithm for Smoothing Triangulated Surfaces", Journal of Computing in Civil Engineering, ASCE, Vol 1, Num 5, pp.85-102, Jan 1991
    keywords:
    • contouring
      		•
    • scattered data
    • smoothing
      		•
    • TINS
    • two-dimensional
      		•

Jones, Norman L. and Stephen G. Wright
    "Solid Modeling for Site Representation in Geotechnical Engineering", Geotechnical Engineering Congress 1991, Boulder, CO/June 10-12 1991, ASCE, pp.1021-1031, June 1991
    keywords:
    • solid modeling
      		•
    • subsurface characterization
    • three dimensional
      		•
    • TINS
    • visualization
      		•

Jones, Norman L. and Stephen G. Wright
    "Solid Modelling for Site Representation in Geotechnical Engineering", Proceedings of the 1991 ASCE Geotechnical Engineering Congress, Boulder, Colorado, June 10-12, 1991, ASCE, pp.1021-1031, June 1991
    keywords:
    • site characterization
      		•
    • solid modeling

Lin, H.C. , Norman L. Jones and D.R. Richards
    "A Microcomputer-Based System for Two-Dimensional Flow Modeling", Proceedings of the ASCE 1991 National Conference on Hydaulic Engineering and International Symposium on Ground Water, Nashville, Tennessee, July 29-August 2, 1991, pp.1-6, July 1991
    keywords:
    • numerical models
      		•
    • shallow water flow
    • two-dimensional
      		•

Lo, S. H.
    "Automatic Mesh Generation and Adaptation by Using Contours", International Journal for Numerical Methods in Engineering, Wiley, Vol 31, pp.689-707, 1991
    keywords:
    • remeshing
      		•
    • density function
    • node spacing
      		•
    • contours
    • triangles
      		•
    • adaptivity
    Abstract

Lo, S.H.
    "Volume Discretization into Tetrahedra - II. 3D Triangulation by Advancing Front Approach", Computers and Structures, Pergamon, Vol 39, Num 5, pp.501-511, 1991
    keywords:
    • advancing front
      		•
    • quality
    • tetrahedron
      		•
    • three-dimensional
    • triangulation
      		•
    Abstract

Lo, S.H.
    "Volume Discretization into Tetrahedra-I. Verification and Orientation of Boundary Surfaces", Computers and Structures, Pergamon Press, Vol 39, Num 5, pp.493-500, 1991
    keywords:
    • advancing front
      		•
    • pre-process
    • tetrahedron
      		•
    • three-dimensional
    Abstract

Parthasarathy, V.N. and Srinivas Kodiyalam
    "A constrained optimization approach to finite element mesh smoothing", Finite Elements in Analysis and Design, Elsevier, Vol 9, pp.309-320, 1991
    keywords:
    • smoothing
      		•
    • optimization-based smoothing
    • octree
      		•
    Abstract

Pruess, Karsten
    "Grid Orientation and Capillary Pressure Effects in the Simulation of Water Injection Into Depleted Vapor Zones", Geothermics, Pergammon, Vol 20, Num 5, pp.257-277, 1991
    keywords:
    • finite difference
      		•
    • groundwater
    Abstract

Rivara, Maria-Cecilia
    "Local Modification of Meshes for Adaptive and/or MultiGrid Finite-Element Methods", Journal of Computational and Applied Mathematics, Elsevier, Num 36, pp.79-89, 1991
    keywords:
    • adaptivity
      		•
    • mesh refinement

Sabin
    "Criteria For Comparison of Automatic Mesh Generation Methods", Advances in Engineering Software, Elsevier, Vol 13, Num 5, pp.220-225, 1991
    keywords:
    • classification
      		•
    • finite elements
    Abstract

Sapidis, Nickolas and Renato Perucchio
    "Delaunay triangulation of arbitrarily shaped planar domains", Computer Aided Geometric Design, North-Holland, Num 8, pp.421-437, 1991
    keywords:
    • Delaunay triangulation
      		•
    • triangulation

Schroeder, William J. and Mark S. Shephard
    "On Rigorous Conditions for Automatically Generating Finite Element Meshes", Product Modeling for Computer-Aided Design and Manufacturing, Elsevier, pp.267-281, 1991
    keywords:
    • quality
      		•
    • octree
    • criteria
      		•
    • data structures
    • mesh criteria
      		•
    Abstract

Shephard, M.S. and J.A. Lo
    "Automatic generation of Coarse Three-dimensional Meshes Using the Functionality of a Geometric Modeler", Advances in Engineering Software, Elsevier, Vol 56, Num 13, pp.273-286, 1991
    keywords:
    • finite elements
      		•
    • three-dimensional

Shephard, Mark S and Marcel K. Georges
    "Automatic Three-Dimensional Mesh Generation by the Finite Octree Technique", International Journal for Numerical Methods in Engineering, Wiley, Vol 32, pp.709-749, 1991
    keywords:
    • octree
      		•
    • tetrahedra
    Abstract

Shephard, Mark S. and Peter M. Finnigan
    "Toward Automatic Model Generation", State-of-the-Art Surveys on Computational Mechanics, eds. Ahmed K. Noor and J. Tinsley Oden, ASME, Vol 11, pp.335-366, 1991
    keywords:
    • data structure
      		•
    • overview
    • octree
      		•
    • tetrahedra
    • artificial intelligence
      		•
    Abstract

Takahashi, H. and H.Shimizu
    "A General Purpose Automatic Mesh Generation Using Shape Recognition Technique", Computers in Engineering, Proc. 1991 ASME Intl. Comp. Engrg. Conf. Expos., ASME, 1991
    keywords:
    • quadrilateral
      		•
    • shape recognition
    • surface meshing
      		•
    • sub-mapping
    • mapped meshing
      		•
    Abstract

Tam T.K.H and C.G Armstrong
    "2D Finite Element Mesh Generation by Medial Axis Subdivision", Advances in Engineering Software, Elsevier, Vol 56, Num 13, pp.313-324, 1991
    keywords:
    • medial axis transform
      		•
    • two-dimensional

Zhu, J.Z., O.C. Zienkiewicz, E. Hinton and J. Wu
    "A New Approach to the Development of Automatic Quadrilateral Mesh Generation", International Journal for Numerical Methods in Engineering, John Wiley & Sons, Vol 32, pp.849-866, 1991
    keywords:
    • advancing front
      		•
    • clean-up
    • quadrilateral
      		•
    Abstract

Contact author(s) or publisher for availability and copyright information on above referenced articles