carrier image

Matthew L. Staten

 Senior Member Technical Staff
Sandia National Laboratories
P.O. Box 5800 MS 0847 Albuquerque, NM 87185-0376
Web Page: http://cubit.sandia.gov
E-mail: mlstate@sandia.gov

MESHING
RESEARCH
CORNER

Canann, Scott A., Joseph R. Tristano, Matthew L. Staten

    "An Approach to Combined Laplacian and Optimization-Based Smoothing for Triangular, Quadrilateral, and Quad-Dominant Meshes", 7th International Meshing Roundtable, Sandia National Labs, pp.479-494, October 1998
    keywords:
    • smoothing
      		•
    • Laplacian smoothing
    • optimization-based smoothing
      		•
    • triangle
    • quadrilateral
      		•
    • metric
    Abstract
    Download Full Paper (Postscript Format)

Owen, Steven J., M. L. Staten, S. A. Canann and S. Saigal
    "Q-Morph: An Indirect Approach to Advancing Front Quad Meshing", International Journal for Numerical Methods in Engineering, Wiley, Vol 9, Num 44, pp.1317-1340, March 1999
    keywords:
    • mesh generation
      		•
    • quadrilateral
    • advancing front
      		•
    • surface meshing
    • Q-Morph
      		•
    • paving
    Abstract

Owen, Steven J., Matthew L. Staten, Scott A. Canann, and Sunil Saigal
    "Advancing Front Quadrilateral Meshing Using Triangle Transformations", 7th International Meshing Roundtable, Sandia National Labs, pp.409-428, October 1998
    keywords:
    • Q-morph
      		•
    • quadrilateral
    • advancing front
      		•
    • surface meshing
    • edge recovery
      		•
    • surface meshing
    Abstract
    Download Full Paper (Postscript Format)

Staten, M.L. and N.L. Jones
    "Local Refinement of Three-Dimensional Finite Element Meshes", Engineering with Computers, Springer-Verlag, Vol 13, pp.165-174, 1997
    keywords:
    • mixed element
      		•
    • refinement
    • templates
      		•
    Abstract

Staten, Matthew
    "Selective Refinement of Two and Three-Dimensional Finite Element Meshes", Master's Thesis, Department of Civil and Environmental Engineering, Brigham Young University, 1996
    keywords:
    • refinement
      		•
    • templates
    Abstract
    Download Full Paper (Postscript Format)

Staten, Matthew L. and Scott A. Canann
    "Post Refinement Element Shape Improvement for Quadrilateral Meshes", AMD-Vol. 220 Trends in Unstructured Mesh Generation, ASME, pp.9-16, July 1997
    keywords:
    • clean-up
      		•
    • quadrilaterals
    • refinement
      		•
    • topology
    Abstract
    Download Full Paper (Postscript Format)

Staten, Matthew L., Robert A. Kerr, Steven J. Owen, Ted D. Blacker
    "Unconstrained Paving and Plastering: Progress Update", Proceedings, 15th International Meshing Roundtable, Springer-Verlag, pp.469-486, September 17-20 2006
    keywords:
    • unconstrained plastering
      		•
    • unconstrained paving
    • hexahedra
      		•
    • quadrilateral
    Abstract
    Download Full Paper (Postscript Format)

Staten, Matthew L., Scott A. Canann, and Steve J. Owen
    "BMSWEEP: Locating Interior Nodes During Sweeping", 7th International Meshing Roundtable, Sandia National Labs, pp.7-18, October 1998
    keywords:
    • hexahedra
      		•
    • sweeping
    • node location
      		•
    • BMSweep
    Abstract
    Download Full Paper (Postscript Format)

Staten, Matthew L., Steven J. Owen, Ted D. Blacker
    "Unconstrained Paving & Plastering: A New Idea for All Hexahedral Mesh Generation", Proceedings, 14th International Meshing Roundtable, Springer-Verlag, pp.399-416, September 11-14 2005
    keywords:
    • hexahedra
      		•
    • plastering
    • sweeping
      		•
    • paving
    Abstract
    Download Full Paper (Postscript Format)

Contact author(s) or publisher for availability and copyright information on above referenced articles