carrier image

P. L. George

Scientific leader of the GAMMA project Rocquencourt research unit
INRIA, France
E-mail: Paul-Louis.George@inria.fr

MESHING
RESEARCH
CORNER

Borouchaki, H., F. Hecht, E. Saltel and P. L. George

    "Reasonably Efficient Delaunay Based Mesh Generator in 3 Dimensions", Proceedings 4th International Meshing Roundtable, Sandia National Laboratories, pp.3-14, October 1995
    keywords:
    • Delaunay
    • tetrahedron
    Abstract
    Download Full Paper (Postscript Format)


Borouchaki, H., M.J. Castro-Diaz, P.L. George, F. Hecht, B. Mohammadi
    "Anisotropic adaptive mesh generation in two dimensions for CFD", 5th International Conference On Numerical Grid Generation in Computational Field Simulations, Mississppi State University, Vol 3, pp.197-206, April 1996
    keywords:
    • adaptivity
    • anisotropy
    • CFD
    • Delaunay
    • triangle
    Abstract


Borouchaki, H., P. L. George and S.H. Lo
    "Optimal Delaunay Point Insertion", International Journal for Numerical Methods in Engineering, Wiley, Vol 39, pp.3407-3437, 1996
    keywords:
    • Delaunay
    • point insertion
    • tetrahedra
    • Voronoi
    Abstract


Borouchaki, H.; George, P. L.; Lo, S. H.
    "Boundary enforcement by facet splits in Delaunay based mesh generation.", Numerical Grid Generation in Computational Field Simulations, The International Society of Grid Generation, pp.203-221, September 2000
    keywords:
    • Delaunay triangulation
    • triangular
    • triangulation
    Abstract


George, P.L, F. Hecht and E. Saltel
    "Constraint of the boundary and automatic mesh generation", Numerical Grid Generation in Computational Fluid Mechanics `88, Pineridge Press, pp.589-597, 1988
    keywords:
    • boundary constrained
    • Delaunay
    Abstract


George, P.L.
    "GHS3D, tetrahedral mesh generator", INRIA - Simulog, March 1996
    keywords:
    • data structures
    • Delaunay
    • point creation
    • tetrahedron
    Abstract


George, P.L.
    "Automatic Mesh Generation: Application to Finite Element Methods", Wiley, pp.333, 1991
    keywords:
    • advancing front
    • Delaunay
    • mapped
    • mulit-block
    • octree
    • overview
    • surface meshing
    • Voronoi
    Abstract


George, P.L., F. Hecht and E. Saltel
    "Automatic Mesh Generator with Specified Boundary", Computer Methods in Applied Mechanics and Engineering, North-Holland, Vol 92, pp.269-288, 1991
    keywords:
    • boundary-constrained
    • Delaunay
    • tetrahedron
    • triangle
    • Voronoi
    Abstract


George, P.L., F. Hecht and M.G. Vallet
    "Creation of Internal Points in Voronoi's Type Method. Control Adaptation", Advances in Engineering Software, Elsevier, Vol 13, Num 5, pp.303-312, 1991
    keywords:
    • finite elements
    • point creation
    • tetrahedron
    • triangles
    • Voronoi


George, P.L., F. Hecht, and E. Saltel
    "Fully Automatic Mesh Generator for 3D Domains of Any Shape", Impact of Comuting in Science and Engineering, Academic Press, Vol 2, pp.187-218, 1990
    keywords:
    • adaptivity
    • boundary-constrained
    • Delaunay
    • tetrahedron
    • Voronoi
    Abstract


George, Paul Louis
    "Automatic 3D Mesh Generation Conforming a Prescribed Size Map", Numerical Grid Generation in Computational Field Simulations, Ed. M. Cross., B. K. Soni, J. F. Thompson, J. Hauser, P. R. Eiseman, Proceedings of the 6th International Conference, held at the University of Greenwich, pp.21-32, July 1998
    keywords:
    • adaptivity
    • tetrahedra
    • boundary constrained
    • Delaunay
    • size map
    Abstract


George, Paul Louis
    "Improvements on Delaunay-based Three-Dimensional Automatic Mesh Generator", Finite Elements in Analysis and Design, Elsevier, Vol 25, pp.297-317, 1997
    keywords:
    • boundary constrained
    • clean-up
    • Delaunay
    • point insertion
    • smoothing
    • tetrahedra
    Abstract


George, Paul Louis
    "Tet Meshing: Construction, Optimization, And Adaptation", Proceedings, 8th International Meshing Roundtable, South Lake Tahoe, CA, U.S.A., pp.133-141, October 1999
    keywords:
    • tetrahedra
    • constrained triangulation
    • Delaunay
    • overview
    • adaptivity
    • optimization
    • smoothing
    Abstract
    Download Full Paper (Postscript Format)


George, Paul Louis and Eric Seveno
    "The Advancing-Front Mesh Generation Method Revisited", International Journal for Numerical Methods in Engineering, Wiley, Vol 37, pp.3605-3619, 1994
    keywords:
    • background mesh
    • advancing front
    • Delaunay
    • triangle
    • tetrahedra
    Abstract


George, Paul Louis and Houman Borouchaki
    "Back to edge flips in 3 dimensions", Proceedings, 12th International Meshing Roundtable, Sandia National Laboratories, pp.393-402, Sept. 2003
    keywords:
    • tetahedra
    • edge flips
    • edge removal
    • edge reduction
    • anisotroopy
    • optimization
    • delaunization
    • optimization
    • boundary integrity
    • topology improvement
    • improvement
    Abstract
    Download Full Paper (Postscript Format)


George, Paul-Louis
    "Tet Meshing", 8th International Meshing Roundtable, unpublished, October 1999
    keywords:
    • tetrahedra
    • Delaunay kernel
    • in-sphere predicate
    • round-off errors
    • adaptivity
    Abstract


George, Paul-Louis and Houman Borouchaki
    "Delaunay Triangulation and Meshing: Application to Finite Elements", Hermes, pp.413, 1998
    keywords:
    • adaptivity
    • anisotropy
    • boundary-constrained
    • data structures
    • Delaunay
    • line meshing
    • overview
    • parametric surface
    • Reimann metric
    • tetrahedra
    • triangle
    Abstract


Hecht, F, P.L. George, B. Borouchaki, M. Castro-Diaz and B. Mohammadi
    "Anisotropic Adaptive Mesh Generation for CFD", Lecture Notes: Princeton Conference, July 1996
    keywords:
    • anisotropy
    • CFD
    • Delaunay
    • metric
    • tetrahedron
    • triangle
    Abstract


Contact author(s) or publisher for availability and copyright information on above referenced articles