carrier image

Meshing Research Corner

MESHING
RESEARCH
CORNER

Tam T.K.H and C.G Armstrong

    "2D Finite Element Mesh Generation by Medial Axis Subdivision", Advances in Engineering Software, Elsevier, Vol 56, Num 13, pp.313-324, 1991
    keywords:
    • medial axis transform
    • two-dimensional


Sibson R.
    "A Brief Description of Natural Neighbor Interpolation", Interpreting Multivariate Data, V. Barnett ed., John Wiley & Sons, New York, pp.21-36
    keywords:
    • interpolation
    • natural neighbor interpolation


Schroeder, W.J. and M.S. Shephard
    "A Combined Octree/Delaunay Method For Fully Automatic 3-D Mesh Generation", International Journal For Numerical Methods in Engineering, John Wiley, Num 29, pp.37-55, 1990
    keywords:
    • Delaunay
    • finite elements
    • octree
    • triangulation


Parthasarathy, V.N., C.M. Graichen and A.F. Hathaway
    "A Comparison of Tetrahedron Quality Measures", Finite Elements in Analysis and Design, Elsevier, Num 15, pp.255-261, 1993
    keywords:
    • finite elements
    • quality checking
    • tetrahedron
    • three-dimensional
    Abstract


Field, D.A.
    "A Generic Delaunay Triangulation Algorithm for Finite Element Meshes", Advances in Engineering Software, Elsevier, Vol 56, Num 13, pp.263-272, 1991
    keywords:
    • Delaunay
    • finite elements
    • triangulation
    Abstract


Jones, Norman L., David R. Richards, Robert A. Evans
    "A Graphical Environment for Three-Dimensional Finite Element Groundwater Modeling", ??
    keywords:
    • GMS
    • groundwater


Schneiders, R.
    "A Grid-Based Algorithm for the Generation of Hexahedral Element Meshes", Engineering With Computers, Feb 1995
    keywords:
    • grid-based mesh generation
    • hexahedron
    Abstract


Lin, H.C. , Norman L. Jones and D.R. Richards
    "A Microcomputer-Based System for Two-Dimensional Flow Modeling", Proceedings of the ASCE 1991 National Conference on Hydaulic Engineering and International Symposium on Ground Water, Nashville, Tennessee, July 29-August 2, 1991, pp.1-6, July 1991
    keywords:
    • numerical models
    • shallow water flow
    • two-dimensional


Lo, S.H.
    "A New Mesh Generation Scheme For Arbitrary Planar Domains", International Journal For Numerical Methods in Engineering, John Wiley, Num 21, pp.1403-1426, 1985
    keywords:
    • finite elements
    • node generation
    • triangulation
    • two-dimensional
    Abstract


Watson D.F. and G.M. Phillip
    "A Refinement of Inverse Distance Weighted Interpolation", Geo-Processing, Elsevier Science Publishers, Num 2, pp.315-327
    keywords:
    • gradient estimation
    • interpolation
    • inverse distance interpolation
    • natural neighbors


Tucciarelli, Tulio
    "A Semiautomatic Mesh Generation Algorithm for Three-Dimensional Groundwater Tetrahedral Finite Element Models", Water Resources Research, American Geophysical Union, Vol 3, Num 25, pp.573-576, March 1989
    keywords:
    • finite elements
    • groundwater
    • tetrahedron
    • three-dimensional


Ning Yu-Wei, Priyo Suprobo, Garrett D. Jeong and Edward C. Ting
    "A regional mixed refinement procedure for finite element mesh design", Finite Elements in Analysis and Design, Elsevier Science Publishers, Num 13, pp.299-318, 1993
    keywords:
    • finite elements


Moscardini, A.G., B.A. Lewis and M. Cross
    "AGTHOM-Automatic Generation of Triangular and Higher Order Meshes", International Journal for Numerical Methods in Engineering, John Wiley, Num 19, pp.1331-1353, 1983
    keywords:
    • finite elements
    • node generation
    • triangulation


Watson D.F.
    "Acord: Automatic Contouring of Raw Data", Computers and Geosciences, Pergamon Press Ltd., Vol 1, Num 8, pp.97-101, 1982
    keywords:
    • contouring
    • Delaunay triangulation
    • triangulation


Baehmann, Peggy L, and Mark S. Shephard
    "Adaptive Multiple-Level h-Refinement in Automated Finite Element Analysis", Engineering With Computers, Springer-Verlag, Num 5, pp.235-247, 1989
    keywords:
    • adaptivity
    • finite elements
    • numerical models


Sapidis N. and Perucchio
    "Advanced Techniques For Automatic Finite Element Meshing From Solid Models", Computer Aided Design, Butterworth and Co., Vol 4, Num 20, pp.248-253, 1989
    keywords:
    • finite elements
    • solid models
    • three dimensional


Jones, Norman L. and Stephen G. Wright
    "Algorithm for Smoothing Triangulated Surfaces", Journal of Computing in Civil Engineering, ASCE, Vol 1, Num 5, pp.85-102, Jan 1991
    keywords:
    • contouring
    • scattered data
    • smoothing
    • TINS
    • two-dimensional


Blacker, Ted D.
    "An Adaptive Finite Element Technique Using Element Equilibrium and Paving", American Society of Mechanical Engineers, Annual Meeting Dallas Texas, November 25-30, 1990, ASME, Nov 1990
    keywords:
    • adaptivity
    • finite elements
    • paving


Cavendish, James C., David A. Field and William H. Frey
    "An Approach to Automatic Three-Dimensional Finite Element Mesh Generation", International Journal for Numerical Methods in Engineering, John Wiley and Sons, Ltd, Num 21, pp.329-347, 1985
    keywords:
    • CAD
    • Delaunay triangulation
    • finite elements
    • tetrahedron
    • three-dimensional


Golias, N.A. and Tsiboukis, T.D.
    "An Approach to Refining Three-Dimensional Tetrahedral Meshes Based on Delaunay Transformations", International Journal for Numerical Methods in Engineering, John Wiley, Num 37, pp.793-812, 1994
    keywords:
    • adaptivity
    • Delaunay triangulation
    • finite elements
    • node generation
    • refinement
    • relaxation
    • smoothing
    • tetrahedron
    • three-dimensional
    • triangulation
    • Voronoi
    Abstract


Gursoy, H. Nebi and Nicholas M. Patrikalakis
    "An Automatic Coarse and Fine Surface Mesh Generation Scheme Based on Medial Axis Transform: Part I Algorithms", Engineering With Computers, Springer Verlag, Num 8, pp.121-137, 1992
    keywords:
    • course meshes
    • medial axis
    • mesh refinement
    • surface mesh
    Abstract


Gursoy, H. Nebi and Nicholas M. Patrikalakis
    "An Automatic Coarse and Fine Surface Mesh Generation Scheme Based on Medial Axis Transform: Part II Implementation", Engineering With Computers, Springer-Verlag, Num 8, pp.179-196, 1992
    keywords:
    • course meshes
    • medial axis
    • mesh refinement
    • surface mesh


Wawrzynek, Paul A. and Anthony R. Ingraffea
    "An Edge-Based Data Structure for Two-Dimensional Finite Element Analysis", Engineering With Computers, Springer-Verlag, Num 3, pp.13-20, 1987
    keywords:
    • data structures
    • finite elements
    • two-dimensional


Magnenat-Thalmann, Nadia and Daniel Thalmann
    "An Indexed Bibliography on Comuter Animation", IEEE Computer Graphics and Applications, IEEE, pp.76-86, July 1985
    keywords:
    • animation
    • bibliography


Schroeder, W.J., M.S. Shephard
    "An O(N) Algorithm to Automatically Generate Geometric Triangulations Satisfying the Delaunay Circumsphere Criteria", Engineering With Computers, Springer-Verlag, Num 5, pp.177-193, 1989
    keywords:
    • Delaunay triangulation
    • octree
    • three dimensional


Blacker T.D., M.B. Stephenson and S. Canann
    "Analysis automation with paving: A new quadrilateral meshing technique", Advances in Engineering Software, Elsevier, Vol 56, Num 13, pp.332-337, 1991
    keywords:
    • finite elements
    • paving
    • two-dimensional


Chang, Chin Yung and James M. Duncan
    "Analysis of Soil Movement around a deep Excavation", Journal of the Soil Mechanics and Foundations Division. Proceedings of the American Socity of Civil Engineers, pp.1655-1680, Sept 1970
    keywords:
    • finite elements
    • numerical models
    • slope stability
    • soil mechanics


Wright, Julian P. and Alan G. Jack
    "Aspects of Three-Dimensional Contrained Delaunay Meshing", International Journal for Numerical Methods in Engineering, Wiley, Num 37, pp.1841-1861
    keywords:
    • Delaunay
    • finite elements
    • three-dimensional


Gursoy, H.N. and N.M. Patrikalakis
    "Automated Interrogation and Adaptive Subdivision of Shape Using Medial Axis Transform", Advances in Engineering Software, Elsevier, Vol 56, Num 13, pp.287-302, 1991
    keywords:
    • finite elements
    • medial axis transform


Blacker, Ted D. M.B. Stephenson, John L. Mithchener, Laurence R. Phillips, Yau T. Lin
    "Automated Quadrilateral Mesh Generation: A Knowledge System Approach", American Society of Mechanical Engineers Annual Meeting, Chicago, Illinois, November 27-December 2 1988, ASME, November 1988
    keywords:
    • finite elements
    • paving
    • two-dimensional


Perucchio, Renato, Makul Saxena and Ajay Kela
    "Automatic Mesh Generation From Solid Models Based On Recursive Spatial Decompositions", International Journal For Numerical Methods In Engineering, John Wiley, Num 28, pp.2469-2501, 1989
    keywords:
    • finite elements
    • octree
    • solid models
    • tetrahedron


Baker, Timothy J.
    "Automatic Mesh Generation for Complex Three-Dimensional Regions Using a Constrained Delaunay Triangulation", Engineering with Computers, Springer-Verlag, Num 5, pp.161-175, 1989
    keywords:
    • Delaunay triangulation
    • finite elements
    • tetrahedron
    • three-dimensional
    Abstract


Yerry, Mark A. and Mark S. Shephard
    "Automatic Three-Dimensional Mesh Generation By The Modified Octree Technique", International Journal For Numerical Methods in Engineering, John Wiley, Num 20, pp.1965-1990, 1984
    keywords:
    • finite elements
    • octree
    • tetrahedron
    • three-dimensional


Cavendish, James C.
    "Automatic Triangulation of Arbitrary Planar Domains For The Finite Element Method", International Journal For Numerical Methods in Engineering, John Wiley, Num 8, pp.679-696, 1974
    keywords:
    • finite elements
    • node generation
    • triangulation
    • two-dimensional


Shephard, Mark S.
    "Automatic and Adaptive Mesh Generation", IEEE Transactions on Magnetics, IEEE, Vol 6, Num 21, pp.2484-2489, Nov. 1985
    keywords:
    • adaptivity
    • finite elements
    • three-dimensional
    • two-dimensional


Shephard, M.S. and J.A. Lo
    "Automatic generation of Coarse Three-dimensional Meshes Using the Functionality of a Geometric Modeler", Advances in Engineering Software, Elsevier, Vol 56, Num 13, pp.273-286, 1991
    keywords:
    • finite elements
    • three-dimensional


Robinson, John
    "CRE Method of Element Testing and the Jacobian Shape Parameters", Eng. Comput., Num 4, pp.113-118, June 1987
    keywords:
    • quality checking


Tamma, Kumar K.
    "Computer Graphics Aided Geometric Modeling and Mesh Generation Schemes for Preprocessing and Finite Element Analysis", Engineering With Computers, Springer-Verlag, Num 3, pp.157-165, 1988
    keywords:
    • finite elements
    • solid modeling


Bowyer A.
    "Computing Dirichlet Tessellations", The Computer Journal, Heyden & Sons Ltd, Vol 2, Num 24, pp.162-166, 1981
    keywords:
    • Delaunay triangulation
    • Dirichlet tessellation
    • n-dimensional
    • triangulation
    Abstract


Watson D.F.
    "Computing the n-dimensional tessellationwith application to Voronoi polytopes", The Computer Journal, Heyden & Sons Ltd., Vol 2, Num 24, pp.167-172
    keywords:
    • Delaunay triangulation
    • n-dimensional
    • triangulation
    • Voronoi


Joe, Barry
    "Construction of Three-Dimensional Delaunay Triangulations Using Local Transformations", Computer Aided Geometric Design, Elsevier Science Publishers (North-Holland), Num 8, pp.123-142, 1991
    keywords:
    • Delaunay triangulation
    • scattered data
    • tetrahedron
    • three-dimensional
    • triangulation
    Abstract


Joe, Barry
    "Construction of Three-Dimensional Improved-Quality Triangulations Using Local Transformations", Siam J. Sci. Comput., Vol 16, pp.1292-1307, 1995
    keywords:
    • clean-up
    • Delaunay
    • improvement
    • tetrahedron
    Abstract


Rivara, Maria-Cecilia
    "Cost Analysis of the Longest-Side (Triangle Bisection) Refinement Algorithm for Triangulations", Technical Report DCC-RR-94/6 Dept. Computer Science, University of Chile
    keywords:
    • mesh refinement
    • triangulation


Pilz, Markus
    "Creation and Boundary Elevation of CSG-Models", Engineering With Computers, Springer-Verlag, Num 5, pp.105-118, 1989
    keywords:
    • brep
    • solid modeling


George, P.L., F. Hecht and M.G. Vallet
    "Creation of Internal Points in Voronoi's Type Method. Control Adaptation", Advances in Engineering Software, Elsevier, Vol 13, Num 5, pp.303-312, 1991
    keywords:
    • finite elements
    • point creation
    • tetrahedron
    • triangles
    • Voronoi


Sabin
    "Criteria For Comparison of Automatic Mesh Generation Methods", Advances in Engineering Software, Elsevier, Vol 13, Num 5, pp.220-225, 1991
    keywords:
    • classification
    • finite elements
    Abstract


Sapidis, Nickolas and Renato Perucchio
    "Delaunay triangulation of arbitrarily shaped planar domains", Computer Aided Geometric Design, North-Holland, Num 8, pp.421-437, 1991
    keywords:
    • Delaunay triangulation
    • triangulation


Dey, Tamal K., Kokichi Sugihara and Chandrajit L. Bajaj
    "Delaunay triangulations in three dimensions with finite precision arithmetic", Computer Aided Geometric Design, North-Holland, Num 9, pp.457-470, 1992
    keywords:
    • Delaunay triangulation
    • robustness
    • three-dimensional
    • triangulation
    Abstract


Alfeld, Peter
    "Derivative Generation From Multivariate Scattered Data by Functional Minimization", Computer Aided Geometric Design, Elsevier Science Publishers (North-Holland), Num 2, pp.281-296, 1985
    keywords:
    • gradient estimation
    • interpolation
    • n-dimensional
    • scattered data


Weatherill, N.P. and O. Hassan
    "Efficient Three-dimensional Delaunay Triangulation with Automatic Point Creation and Imposed Boundary Constraints", International Journal for Numerical Methods in Engineering, Wiley, Num 37, pp.2005-2039, 1994
    keywords:
    • Delaunay
    • finite elements
    • point creation
    • tetrahedron
    • three-dimensional
    Abstract


Halstead, Mark, Michael Kass, Tony DeRose
    "Efficient, Fair Interpolation using Catmull-Clark Surfaces", Computer Graphics, ACM, pp.35-44
    keywords:
    • interpolation
    • surface patches
    • surface reconstruction


Baker, Timothy J.
    "Element Quality in Tetrahedral Meshes", Proceedings of the 7th International Conference on Finite Element Methods in Flow Problems, pp.1018-1024, April 1989
    keywords:
    • mesh generation
    • quality
    • tetrahedron
    • triangles
    Abstract


Pentland, Alex P.
    "Equilibrium and Interpolation Solutions Using Wavelet Bases", ?, pp.507-524
    keywords:
    • interpolation
    • wavelets
    Abstract


Cavendish J.C., W.H. Frey and S.P. Marin
    "Feature-Based Design and Finite Element Mesh Generation For Functional Surfaces", Advances in Engineering Software, Elsevier, Vol 13, Num 5, pp.226-237, 1991
    keywords:
    • Delaunay
    • finite elements
    • surface mesh
    • surface patches
    • triangulation
    • two-dimensional
    Abstract


Ho-Le K.
    "Finite Element Mesh Generation Methods: A Review and Classification", Computer Aided Design, Butterworth & Co. Ltd, Vol 1, Num 20, pp.27-38, Jan/Feb 1988
    keywords:
    • classification
    • Delaunay triangulation
    • finite elements
    • smoothing
    • three dimensional
    • two-dimensional
    Abstract


Boender, Edwin, Willem F. Bronsvoort and Frits H. Post
    "Finite Element Mesh Generation from Constructive-Solid-Geometry Models", Computer Aided Design, Butterworth-Heinemann Ltd, Vol 5, Num 26, pp.379-392, May 1994
    keywords:
    • CSG
    • tetrahedron
    • triangulation
    Abstract


Shephard, Mark S.
    "Finite Element Modeling Within an Integrated Geometric Modeling Environment: Part I--Mesh Generation", Engineering With Computers, Springer-Verlag, Num 1, pp.61-71, 1985
    keywords:
    • finite elements
    • geometric modeling


Sederberg, Thomas W. and Scott R. Parry
    "Free-Form Deformation of Solid Geometric Models", ACM Siggraph 1986, ACM, Vol 4, Num 20, pp.151-160, August 1986
    keywords:
    • Free-form deformation
    • geometric modeling


Frey, Pascal, Benoit Sarter and Michel Gautherie
    "Fully Automatic Mesh Generation For 3-D Domains Based Upon Voxel Sets", International Journal For Numerical Methods in Engineering, John Wiley, Num 37, pp.2735-2753, 1994
    keywords:
    • divide-and-conquer
    • finite elements
    • iso-surface
    • octree
    • spatial decomposition
    • tetrahedron
    • three-dimensional
    • voxels
    Abstract


Joe, B.
    "GEOMPACK - A Software Package for the Generation of Meshes Using Geometric Algorithms", Advances in Engineering Software, Elsevier, Vol 13, Num 5, pp.325-331, 1991
    keywords:
    • Delaunay
    • software
    • tetrahedron
    • three-dimensional
    • two-dimensional


Joe, Barry
    "GEOMPACK - A Software Package for the Generation of Meshes Using Geometric Algorithms", Adv. Eng. Software, Elsevier, Vol 13, Num 5, pp.325-331, 1991
    keywords:
    • Delaunay
    • tetrahedron
    • triangle


Joe, Barry
    "GEOMPACK User's Guide", (downloaded from Barry Joe's internet site at UofA)
    keywords:
    • Delaunay
    • tetrahedron
    • three-dimensional
    • triangulation
    • two-dimensional


Zundel, Alan K., Takafumi Saito, Steven J. Owen, Thomas W. Sederberg
    "Gas Flow Visualization for Combustion Analysis", Energy and Fuels, Vol 6, Num 7, pp.891-896, Nov 1993
    keywords:
    • fluid dynamics
    • vector fields
    • visualization


Cass, Roger J.
    "Generalized 3D Paving: An Automated Quadrilateral Surface Mesh Generation Algorithm", International Journal For Numerical Methods In Engineering, John Wiley & Sons, Vol 39, pp.1475-1489, 1996
    keywords:
    • clean-up
    • density function
    • finite elements
    • paving
    • surface mesh
    Abstract


Lo, S.H.
    "Generation of High Quality Gradation Finite Element Mesh", Engineering Fracture Mechanics, Pergamon, Vol 2, Num 41, pp.191-202, 1992
    keywords:
    • advancing front
    • mesh refinement
    • quality checking
    • triangles


Hoffman, Christoph M.
    "Geometric Approaches to Mesh Generation", Keynote presentation at the IMA Summer Program on Mesh Generation, University of Minesota, June 1993, pp.1-22, June 1993
    keywords:
    • brep
    • CAD
    • finite elements
    • three-dimensional


Henry, R.F. and R.A. Walters
    "Geometrically Based, Automatic Generator for Irregular Triangular Networks", Communications in Numerical Methods in Engineering, Wiley, Num 9, pp.555-566, 1993
    keywords:
    • density function
    • refinement


Finnigin P.M., A. Kela and J.E. Davis
    "Geometry as a Basis for Finite Element Automation", Engineering With Computers, Springer-Verlag, Num 5, pp.147-160, 1989
    keywords:
    • finite elements
    • geometric modeling


Schroeder, W.J. and M.S. Shephard
    "Geometry-Based Fully Automatic Mesh Generation and the Delaunay Triangulation", International Journal For Numerical Methods in Engineering, John Wiley, Num 26, pp.2503-2515, 1988
    keywords:
    • Delaunay
    • finite elements
    • tetrahedron
    • triangulation


Jones, Norman L. and James Nelson
    "Geoscientific Modeling with TINs", Geobyte, pp.44-49, August 1992
    keywords:
    • contouring
    • interpolation
    • scattered data
    • subsurface characterization
    • TINS
    • two-dimensional


Xie, G and J.A.H. Raemakers
    "Graded Mesh Generation and Transformations", Finite Elements in Analysis and Design, Elsevier, Num 17, pp.41-55, 1994
    keywords:
    • advancing front
    • finite elements
    • paving
    • triangles
    • two-dimensional


McCool, Michael and Eugene Fiume
    "Hierarchical Poisson Disc Sampling Distributions", Procedings Graphics Interface '92, pp.94-105, May 1992
    keywords:
    • node generation
    • ray tracing


Reeves, William T.
    "Inbetweening for Computer Animation Utilizing Moving Point Constraints", Computer Graphics, ACM, Vol 3, Num 15, pp.263-269, August 1981
    keywords:
    • animation
    • graphics
    • keyframes


Barnhill, Robert E. Thomas A. Foley and David A. Lane
    "Interpolating Scattered Multivariate Data as a Function of Time", Computer Aided Geometric Deisgn, Elsevier Science Publishers, Num 9, pp.337-348, 1992
    keywords:
    • interpolation
    • n-dimensional
    • scattered data


Kochanek, Doris H.U.
    "Interpolating Splines with Local Tension, Continuity and Bias Control", Comutyer Graphics, ACM, Vol 3, Num 18, pp.33-41, July 1984
    keywords:
    • animation
    • keyframes


Oostendorp, Thom F. , Adrian Van Oosterom and Geertjan Huiskamp
    "Interpolation on a Triangulated 3D Surface", Journal of Computational Physics, Academic Press, Num 80, pp.331-343, 1989
    keywords:
    • interpolation


Bern, Marshall, Scott Mitchell and Jim Ruppert
    "Linear-size Nonobtuse Triangulation of Polygons", 10th Annual Symposium on Computational Geometry
    keywords:
    • angle
    • mesh generation
    • recursive subdivision
    • triangulation
    Abstract


Rivara, Maria-Cecilia
    "Local Modification of Meshes for Adaptive and/or MultiGrid Finite-Element Methods", Journal of Computational and Applied Mathematics, Elsevier, Num 36, pp.79-89, 1991
    keywords:
    • adaptivity
    • mesh refinement


Sibson R.
    "Locally Equiangular Triangulations", The Computer Journal, Vol 3, Num 21, pp.243-245
    keywords:
    • Delaunay triangulation
    • Dirichlet tessellation
    • triangulation
    • two-dimensional


Hinton, E., N.V.R. Rao and M. Ozakca
    "Mesh Generation With Adaptive Finite Element Analysis", Advances in Engineering Software, Elsevier, Vol 13, Num 5, pp.238-262, 1991
    keywords:
    • adaptivity
    • finite elements
    • two-dimensional


Bern, Marshall, David Eppstein
    "Mesh Generation and Optimal Triangulation", Computing in Euclidean Geometry Eds. D.Z. Du and F.K. Hwang, World Scientific Publishing Co., pp.23-90
    keywords:
    • Delaunay
    • Steiner Points
    • tetrahedron
    • triangulation
    Abstract


Mackerle, Jaroslav
    "Mesh Generation and Refinement for FEM and BEM -- A Bibliography", Finite Elements in Analysis and design, Elsevier, Num 15, pp.177-188, 1993
    keywords:
    • bibliography
    • boundary element method
    • classification
    • mesh generation
    • mesh refinement


Jones, Norman L. and David R. Richards
    "Mesh Generation for Estuarine Flow Modeling", Journal of Waterway, Port, Coastal, and Ocean Engineering, ASCE, Vol 6, Num 118, pp.599-614, Nov/Dec 1992
    keywords:
    • finite elements
    • shallow water flow
    • two-dimensional


Hoppe, Hugues, Tony DeRose, Tom DuChamp, John McDonald, Werner Stuetzle
    "Mesh Optimization", Computer Graphics, ACM, pp.19-26, 1993
    keywords:
    • surface meshing
    • surface reconstruction


Rippa, Samuel
    "Minimal Roughness property of the Delaunay trianguation", Computer Aided Geometric Design, North-Holland, Num 7, pp.489-497, 1990
    keywords:
    • Delaunay triangulation
    • triangulation


Falcidieno B., and C. Pienovi
    "Natural surface approximation by constrained stochastic interpolation", Computer Aided Design, Vol 3, Num 22, April 1990
    keywords:
    • interpolation
    • stochastic interpolation
    • terrain modeling


Watson D.F. and G.M. Phillip
    "Neighbor-Based Interpolation", Geobyte, Vol 2, Num 2, pp.12-16, 1987
    keywords:
    • gradient estimation
    • interpolation
    • natural neighbor interpolation
    • two-dimensional


D'Azevedo E.F. and R.B. Simpson
    "On Optimal Interpolation Triangle Incidences", SIAM, Society for Industrial and Applied Mathematics, Vol 6, Num 10, pp.1063-1075, November 1989
    keywords:
    • Delaunay triangulation
    • interpolation
    • triangulation
    • two-dimensional


Hamilton W.
    "On The Application of Quaternions to the Theory of Rotation", Philosophical Magazine, Num 33, pp.196-200, 1848
    keywords:
    • animation
    • quaternions


Canann Scott A., Micheal B. Stephenson and Ted Blacker
    "Optismoothing: An optimization-driven approach to mesh smoothing", Finite Elements in Analysis and Design, Elsevier Science Publishers, Num 13, pp.185-190, 1993
    keywords:
    • finite elements
    • hexahedron
    • optimization
    • smoothing
    • three-dimensional


Blacker, Ted D.
    "Paving: A New Approach To Automated Quadrilateral Mesh Generation", International Journal For Numerical Methods in Engineering, John Wiley, Num 32, pp.811-847, 1991
    keywords:
    • finite elements
    • paving
    Abstract


Jones, Norman L., Steven J. Owen and Ernest C. Perry
    "Plume Characterization with Natural Neighbor Interpolation", Geoenvironment 2000, Proceedings of a Specialty Conference Sponsored by the Geotechnical Engineering and Environmental Engineering Divisions/ASCE Held February 24-26, 1995, New Orleans, Louisiana, ASCE, pp.331-345
    keywords:
    • interpolation
    • inverse distance weighted
    • kriging
    • natural neighbor
    Abstract


Shoemake, Ken
    "Polar Decomposition for Rotation Extraction", Siggraph 1991 Course Notes, pp.B44-B49
    keywords:
    • animation
    • matrices
    • rotation


Lasseter, John
    "Principles of Traditional Animation Applied to 3D Computer Animation", Computer Graphics, ACM, Vol 4, Num 21, pp.35-44, July 1987
    keywords:
    • animation
    • graphics
    • keyframes


Lawson, Charles L.
    "Properties of n-dimensional triangulations", Computer Aided Geometric Design, North-Holland, Num 3, pp.231-246, 1986
    keywords:
    • Delaunay triangulation
    • Dirichlet tessellation
    • n-dimensional
    • triangulation


Joe, Barry
    "Quadrilateral Mesh Generation in Polygonal Regions", (downloaded from Barry Joe's internet site at UofA), September 1994
    keywords:
    • polygonal decomposition
    • quadrilateral


Ladeveze P. J.-P. Pelle, Ph. Rougeot
    "Quality Checking and Optimized Meshes for Finite Element Computations", 3rd International Conference on Numerical Methods in Engineering: Theory Apl.., Num 2, 1990
    keywords:
    • mesh generation
    • quality checking


Liu, Anwei, and Barry Joe
    "Quality Local Refinement of Tetrahedral Meshes Based on 8-Subtetrahedron Subdivision", (downloaded from Barry Joe's internet site at UofA)
    keywords:
    • tetrahedra
    • refinement


Liu, Anwei and Barry Joe
    "Quality Local Refinement of Tetrahedral Meshes Based on Bisection", (downloaded from Barry Joe's internet site at UofA), Feb 1994
    keywords:
    • mesh generation
    • mesh refinement
    • tetrahedron


Mitchell, Scott A. and Stephen A. Vavasis
    "Quality Mesh Generation in Three Dimensions (Extended Abstract)", ACM Symposium on Computational Geometry, 1992
    keywords:
    • mesh refinement
    • quality checking
    Abstract


Shoemake, Ken
    "Quaternion Calculus For Animation"
    keywords:
    • animation
    • quaternions


Nishita, Tomoyuki, Thomas W. Sederberg and Masanori Kakimoto
    "Ray Tracing Trimmed Rational Surface Patches", Computer Graphics, ACM, Vol 4, Num 24, pp.337-345, August 1990
    keywords:
    • display algorithms
    • graphics
    • parametric surfaces
    • ray tracing
    • surface patches


Schneiders, Robert, and Jurgen Debye
    "Refinement Algorithms for Unstructured Quadrilateral or Brick Element Meshes", Modeling, Mesh Generation and adaptive Numerical Methods for Partial Differential Equations; Proceedings IMA
    keywords:
    • hexahedron
    • mesh refinement
    • quadrilateral
    Abstract


Mitchell, Scott A.
    "Refining a Triangulation of a Planar Straight-Line Graph to Eliminate Large Angles", FOCS, 1993
    keywords:
    • angle
    • mesh refinement
    • Steiner Points
    • triangulation


Sederberg, Thomas W. and Alan K. Zundel
    "Scan Line Display of Algebraic Surfaces", Computer Graphics, ACM, Vol 3, Num 23, pp.147-156, July 1989
    keywords:
    • algebraic surfaces
    • display algorithms
    • graphics


Alfeld, Peter
    "Scattered Data Interpolation in Three or More Variables", Mathematical Methods in Computer Aided Geometric Design (Tom Lyche and Larry L. Schumaker eds.), Academic Press, pp.1-33, 1989
    keywords:
    • n-dimensional
    • natural neighbor interpolation
    • scattered data
    • three-dimensional


Foley, Thomas A.
    "Scattered data interpolation and approximation with error bounds", Computer Aided Geometric Design, Elsevier, Num 3, pp.163-177, 1986
    keywords:
    • error bounds
    • Hermite
    • interpolation
    • least-squares
    • three-dimensional


Blacker T.D. and Meyers R.J.
    "Seams and Wedges in Plastering:A 3D Hexahedral Mesh Generation Algorithm", Engineering with Computers, Springer Verlag, Vol 2, Num 9, pp.83-93, 1993
    keywords:
    • finite elements
    • hexahedron
    • mesh generation
    • plastering
    • three dimensional
    Abstract


Mitchell, K. G., J. Penman
    "Self Adaptive Mesh Generation for 3-D Finite Element Calculation", IEEE Transactions on Magnetics, IEEE, Vol 2, Num 28, pp.1751-1754, March 1992
    keywords:
    • adaptivity
    • Delaunay triangulation
    • finite elements
    • three-dimensional


Meyling, R.H.J. Gmelig and P.R. Pfluger
    "Smooth Interpolation to Scattered Data by Bivariate Piecewise Polynomials of Odd Degree", Computer Aided Geometric Design, Elsevier Science Publishers (North-Holland), Num 7, pp.439-458, 1990
    keywords:
    • interpolation
    • polynomial interpolation
    • scattered data
    • two-dimensional


Lawson, C. L.
    "Software for C1 Surface Interpolation", Mathematical Software III, J. Rice ed., Academic Press, New York, pp.161-194, 1977
    keywords:
    • Delaunay
    • interpolation
    • triangulation
    • two-dimensional
    Abstract


Jones, Norman L. and Stephen G. Wright
    "Solid Modeling for Site Representation in Geotechnical Engineering", Geotechnical Engineering Congress 1991, Boulder, CO/June 10-12 1991, ASCE, pp.1021-1031, June 1991
    keywords:
    • solid modeling
    • subsurface characterization
    • three dimensional
    • TINS
    • visualization


Jones, Norman L. and Stephen G. Wright
    "Solid Modelling for Site Representation in Geotechnical Engineering", Proceedings of the 1991 ASCE Geotechnical Engineering Congress, Boulder, Colorado, June 10-12, 1991, ASCE, pp.1021-1031, June 1991
    keywords:
    • site characterization
    • solid modeling


Rammelkamp, J. N.L. Dung and O. Mahrenholtz
    "Some Aspects to the Quality of the FE-mesh in Simulation of Metal Forming Processes", Numerical Methods in Industrial Forming Processes. Wood & Zienkiewics (eds.), Balkema, 1992
    keywords:
    • mesh generation
    • mesh refinement
    • quality checking


Lohner, Rainald
    "Some Useful Renumbering Strategies for Unstructured Grids", International Journal for Numerical Methods in Engineering, Wiley, Num 36, pp.3259-3270, 1993
    keywords:
    • finite elements
    • renumbering


Arabshahi S., D.C. Barton and N.K. Shaw
    "Steps towards CAD-FEA integration", Engineering with Computers, Springer-Verlag, Num 9, pp.17-26, 1993
    keywords:
    • CAD
    • finite elements
    • solid modeling
    • solid modeling
    • three-dimensional


Matanga, George B.
    "Stream functions in three-dimensional groundwater flow", Water Resources Research, American Geophysical Union, Vol 9, Num 29, pp.3125-3133, Sept 1993
    keywords:
    • groundwater
    • stream functions
    • three-dimensional


Jones, Norman L. and Stephen G. Wright
    "Subsurface Characterization with Solid Models", Journal of Geotechnical Engineering, ASCE, Vol 11, Num 119, pp.1823-1839, Nov 1993
    keywords:
    • solid modeling
    • subsurface characterization
    • three-dimensional
    • TINS
    • visualization


Hoppe, Hugues, Tony DeRose, Tom DuChamp, John McDonald, Werner Stuetzle
    "Surface Reconstruction From Unorganized Points", Computer Graphics, ACM, Vol 2, Num 26, pp.71-78, July 1992
    keywords:
    • surface meshing
    • surface reconstruction


Brown, J.L.
    "Systems of Coordinates Associated With Points Scattered in the Plane"
    keywords:
    • natural neighbor interpolation


Kettunen, Lauri and Kimmo Forsman
    "Tetrahedral Mesh Generation in Convex Primitives", International Journal For Numerical Methods in Engineering, Wiley, Vol 38, pp.99-117, February 1995
    keywords:
    • convex
    • quality
    • tetrahedron
    • three-dimensional
    Abstract


Joe, Barry
    "Tetrahedral Mesh Generation in Polyhedral Regions Based on Convex Polyhedron Decompositions", International Journal for Numerical Methods in Engineering, John Wiley, Num 37, pp.693-713, 1994
    keywords:
    • polyhedral decomposition
    • tetrahedron


Jung, Y.H. and K. Lee
    "Tetrahedron-based octree encoding for automatic mesh generation", Computer Aided Design, Butterworth-Heinemann Ltd., Vol 3, Num 25, pp.141-153, March 1993
    keywords:
    • finite elements
    • tetrahedron
    • three-dimensional


Mayo, Alan L. and James E. Slosson
    "The Application of Ground-Water Flow Models as Predictive Tools - A Review of Two Ground-Water Models of Eastern Honey Lake Valley, California-Nevada", Bulletin of the Association of Engineering Geologists, AEG, Vol 2, Num 29, pp.151-163, 1992
    keywords:
    • groundwater
    • MODFLOW
    • numerical models


Catmull, Edwin
    "The Problems of Computer-Assisted Animation", ??
    keywords:
    • animation
    • graphics
    • keyframes


Joe, Barry
    "Three Dimensional Boundary Constrained Triangulations", Artificial Intelligence, Expert Systems, and Symbolic Computing -- Proceedings of the 13th IMACS World Congress, ed. E. N. Houstis and J. R. Rice, Elsevier Science, pp.215-222, 1992
    keywords:
    • boundary-constrained
    • Delaunay
    • tetrahedron
    • triangulation


Shenton, D.N., Z.J. Cendes
    "Three-Dimensional Finite Element Mesh Generation Using Delaunay Tesselation", IEEE Transactions on Magnetics, IEEE, Vol 6, Num 21, pp.2535-2538, Nov. 1985
    keywords:
    • Delaunay triangulation
    • finite elements
    • tetrahedron
    • three-dimensional


Turner, A. Keith
    "Three-Dimensional GIS: Possibilities Attract Geosciences in Many Industries, Worldwide", Geobyte, pp.31-32, February 1990
    keywords:
    • GIS
    • three-dimensional


Mills Robert
    "Todays FEA: Integrated, Accurate and Fast", Computer Aided Engineering, pp.52-61, January 1990
    keywords:
    • finite element
    • numerical models


Watson D.F. and G.M. Phillip
    "Triangle Based Interpolation", Mathematical Geology, Plenum publishing, Vol 8, Num 16, pp.779-795, 1984
    keywords:
    • contouring
    • Delaunay triangulation
    • gradient
    • interpolation
    • linear interpolation
    • scattered data
    • triangulation
    • Voronoi


Lee D.T. and B.J. Schacter
    "Two Algorithms for Constructing a Delaunay Triangulation", International Journal of Computer and Information Sciences, Plenum Press, Vol 3, Num 9, 1980
    keywords:
    • Delaunay triangulation
    • triangulation
    • Voronoi
    Abstract


Stephenson, M.B. and T.D. Blacker
    "Using Conjoint Meshing Primitives to Generate Quadrilateral and Hexehedral Elements in Irregular Regions", Computers in Engineering, Book no. G0502B, ASME, 1989
    keywords:
    • finite elements
    • paving
    • plastering


Brown J.L.
    "Vertex based data dependant triangulations", Computer Aided Geometric Design, North-Holland, Num 8, pp.239-251, 1991
    keywords:
    • data-dependant triangulation
    • triangulation
    • two-dimensional


Lo, S.H.
    "Volume Discretization into Tetrahedra-I. Verification and Orientation of Boundary Surfaces", Computers and Structures, Pergamon Press, Vol 39, Num 5, pp.493-500, 1991
    keywords:
    • advancing front
    • pre-process
    • tetrahedron
    • three-dimensional
    Abstract


Jones, Norman L., Stephen G. Wright and David R. Maidment
    "Watershed Delineation with Triangle-Based Terrain Models", Journal of Hydraulic Engineering, ASCE, Vol 10, Num 116, pp.1232-1250, October 1990
    keywords:
    • TINS
    • watershed


Schmidt, Joe
    "correspondance regarding mesh refinement to Norm Jones"
    keywords:
    • mesh refinement


Canann, S.A., S.N Muthukrishnan and R.K. Phillips
    "Topological Refinement Procedures for Triangular Finite Element Meshes", MSC/PDA, 1994
    keywords:
    • clean-up
    • finite elements
    • refinement
    • triangle
    • two-dimensional
    Abstract


Frey, William H.
    "Selective Refinement: A New Strategy for Automatic Node Placement in Graded Triangular Meshes", International Journal for Numerical Methods in Engineering, Wiley, Vol 24, pp.2183-2200, 1987
    keywords:
    • Delaunay
    • density function
    • node generation
    • refinement
    • triangle
    • two-dimensional
    Abstract


Frey, William H. and David H. Field
    "Mesh relaxation: A new Technique for Improving Triangulations", International Journal For Numerical Methods in Engineering, Vol 31, pp.1121-1133, 1991
    keywords:
    • refinement
    • relaxation
    • triangle
    • two-dimensional


Boender, Edwin
    "Reliable Delaunay-Based Mesh Generation and Mesh Improvement", Communications in Numerical Methods in Engineering, Wiley, Vol 10, pp.773-783, 1994
    keywords:
    • boundary-constrained
    • Delaunay
    • refinement
    • relaxation
    • triangle
    • two-dimensional
    Abstract


Mitchell, Scott A.
    "Finding a Covering Triangulation Whose Maximum Angle is Provably Small", Sandia National Labs, September 1993
    keywords:
    • angle
    • Steiner Points
    • triangle
    • triangulation
    • two-dimensional


Mitchell, Scott A.
    "Cardinality Bounds for Triangulations with Bounded Minimum Angle", 6th Canadian Conference on Computational Geometry
    keywords:
    • angle
    • cardinality
    • triangulation


Ruppert, Jim
    "A Delaunay Refinement Alorithm for Quality 2-Dimensional Mesh Generation", Journal of Algorithms, pp.1-45, Feb 1994
    keywords:
    • aspect ratio
    • Delaunay
    • quality
    • refinement
    • triangulation
    • two-dimensional
    Abstract


Liu, Y.C., H.A. ElMaraghy and K.F. Zhang
    "An Expert System for Forming Quadrilateral Finite Elements", Engineering Computations, Pineridge Press, Vol 7, Num 3, pp.249-257, September 1990
    keywords:
    • density function
    • expert systems
    • quadrilateral
    • transition meshes


Lo, S.H.
    "Volume Discretization into Tetrahedra - II. 3D Triangulation by Advancing Front Approach", Computers and Structures, Pergamon, Vol 39, Num 5, pp.501-511, 1991
    keywords:
    • advancing front
    • quality
    • tetrahedron
    • three-dimensional
    • triangulation
    Abstract


Joe, B and R.B. Simpson
    "Triangular Meshes for Regions of Complicated Shape", International Journal for Numerical Methods in Engineering, Wiley, Vol 23, pp.751-778, 1986
    keywords:
    • decomposition
    • density function
    • polygonal decomposition
    • triangle
    Abstract


Joe, Barry
    "On the Correctness of a Linear-time Visibility Polygon Algorithm", International Journal of Computer Mathematics, Gordon and Breach Science Publishers, Inc., Vol 32, pp.155-172, 1990
    keywords:
    • computational geometry
    • polygonal decomposition
    • visibility


Chazelle, Bernard
    "Convex Partitions of Polyhedra: A Lower Bound and Worst Case Optimal Algorithm", SIAM J. Comput., SIAM, Vol 13, Num 3, pp.488-507, August 1984
    keywords:
    • computational geometry
    • decomposition
    • polyhedral decomposition
    • spatial decomposition


Joe, Barry
    "Finite Element Triangulation of Complex Regions Using Computational Geometry", Dissertation, Dept of Computer Science, University of Waterloo, Waterloo, Ontario, Canada, pp.141, July 1984
    keywords:
    • computational geometry
    • finite elements
    • polyhedral decomposition
    • triangulation


Owen, Steven J., Norman L. Jones and Jeffrey P. Holland
    "A Comprehensive Modeling Environment for the Simulation of Groundwater Flow and Transport", Engineering With Computers, Springer-Verlag, Vol 12, pp.235-242, December 1996
    keywords:
    • Delaunay
    • finite elements
    • GMS
    • groundwater
    • iso-surface
    • kriging
    • MODFLOW
    • natural neighbor interpolation
    • paving
    • relaxation
    • site characterization
    • three-dimensional
    • TINS
    • triangulation
    • two-dimensional
    Abstract


Canann, S.A., S.N. Muthukrishnan and R.K. Phillips
    "Topological Improvement Procedures for Quadrilateral Finite Element Meshes", MSC.PDA, 1994
    keywords:
    • clean-up
    • finite elements
    • quadrilateral
    • quality
    • refinement


Owen, Steven J.
    "MOVIE's animation system: How has it been made more efficient and user friendly", ECGL Technical Reoprt, Brigham Young University, Nov. 1989
    keywords:
    • animation


Yeker, Cengiz and Ibrahim Zeid
    "Automatic Three-Dimensional Finite Element Mesh Generation via Modified ray Casting", International Journal for Numerical Methods in Engineering, Wiley, Vol 38, pp.2573-2601, 1995
    keywords:
    • CSG
    • hexahedron
    • ray tracing
    • tetrahedron
    Abstract


Lo, S.H.
    "Finite Element Mesh Generation Over Curved Surfaces", Computers and Structures, Pergammon Press, Vol 29, Num 5, pp.731-742, 1988
    keywords:
    • surface meshing
    • triangle
    Abstract


Lo, S.H.
    "Perspective Projection of Non-Convex Polyhedra", International Journal For Numerical Methods in Engineering, John Wiley and Sons, Ltd, Vol 26, pp.1485-1506, 1988
    keywords:
    • display algorithms
    • graphics
    • hidden line
    • non-convex polyhedra
    Abstract


Chew, Paul L.
    "Guaranteed-Quality Triangular Meshes", Department of Computer Science Tech Report 89-983, Cornell University, 1989
    keywords:
    • Delaunay
    • quality
    • triangle
    • two-dimensional
    Abstract


Facello, Michael, A.
    "Implementation of a Randomized Algorithm for Delaunay and Regular Triangulations in Three Dimensions", Computer Aided Geometric Design, Elsevier, Vol 12, pp.349-370, 1995
    keywords:
    • Delaunay
    • regular triangulation
    • tetrahedron
    Abstract


Borouchaki, H., F. Hecht, E. Saltel and P. L. George
    "Reasonably Efficient Delaunay Based Mesh Generator in 3 Dimensions", Proceedings 4th International Meshing Roundtable, Sandia National Laboratories, pp.3-14, October 1995
    keywords:
    • Delaunay
    • tetrahedron
    Abstract
    Download Full Paper (Postscript Format)


Conraud, Joel
    "Lazy Constrained Tetrahedralization", Proceedings 4th International Meshing Roundtable, Sandia National Laboratories, pp.15-26, October 1995
    keywords:
    • boundary-constrained
    • Delaunay
    • lazy-constrained
    • Steiner Points
    • tetrahedron
    Abstract
    Download Full Paper (Postscript Format)


Lohner, Rainald
    "Surface Gridding from Discrete Data", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.29-44, October 1995
    keywords:
    • advancing front
    • interpolation
    • scattered data
    • surface mesh
    • surface reconstruction
    • terrain modeling
    Abstract
    Download Full Paper (Postscript Format)


Turkiyyah, George, M., Duane W. Storti, Mark Ganter, Hao Chen
    "A Skeleton-Based Approach to Automated Hexahedral Mesh Generation for Solid Models", Proceeding, 4th International Meshing Roundtable, Sandia National Laboratories, pp.late addition, October 1995
    keywords:
    • hexahedron
    • medial axis
    • skeleton-based
    Abstract


Freitag, Lori, Mark Jones, and Paul Plassmann
    "An Efficient Parallel Algorithm for Mesh Smoothing", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.47-58, October 1995
    keywords:
    • optimization
    • parallel processing
    • smoothing
    Abstract
    Download Full Paper (Postscript Format)


Lober, Randy R., Timothy J. Tautges, Rich A. Cairncross
    "The Parallelization of an Advancing-Front, All-Quadrilateral Meshing Algorithm for Adaptive Analysis", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.59-70, October 1995
    keywords:
    • adaptivity
    • parallel processing
    • paving
    • quadrilateral
    Abstract
    Download Full Paper (Postscript Format)


Castro-Diaz, M.J., F. Hecht, and B. Mohammadi
    "New Progress in Anisotropic Grid Adaptation for Inviscid and Viscous Flows Simulations", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.73-85, October 1995
    keywords:
    • adaptivity
    • anisotropy
    • CFD
    • Delaunay
    • metric
    Abstract
    Download Full Paper (Postscript Format)


Wang, Z.J.
    "Proof of Concept - An Automatic CFD Computing Environment with a Cartesian/Prism Grid Generator, Grid Adaptor and Flow Solver", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.87-99, October 1995
    keywords:
    • adaptivity
    • cartesian grid
    • CFD


Schneiders, R.
    "Automatic Generation of Hexahedral Finite Element Meshes", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.103-114, October 1995
    keywords:
    • grid-based mesh generation
    • hexahedron
    Abstract
    Download Full Paper (Postscript Format)


Tautges, Timothy J. and Scott A. Mitchell
    "Whisker Weaving: Invalid Connectivity Resolution and Primal Construction Algorithm", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.115-127, October 1995
    keywords:
    • clean-up
    • hexahedron
    • spatial twist continuum (STC)
    • whisker weaving
    Abstract
    Download Full Paper (Postscript Format)


Hohmeyer, Michael E., Wayne Christopher
    "Fully-Automatic Object-Based Generation of Hexahedral Meshes", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.129-138, October 1995
    keywords:
    • cartesian grid
    • hexahedron
    Abstract
    Download Full Paper (Postscript Format)


Holmes, David I.
    "Generalized Method of Decomposing Solid Geometry into Hexahedron Finite Elements", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.141-152, October 1995
    keywords:
    • hexahedron
    • mapped meshing
    • medial axis
    • spatial decomposition
    Abstract
    Download Full Paper (Postscript Format)


Jones, M.R., M.A. Price and G. Butlin
    "Geometry Management Support for Auto-Meshing", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.153-164, October 1995
    keywords:
    • CAD
    • dirty geometry
    • geometry management
    Abstract
    Download Full Paper (Postscript Format)


White, David R., Lai Mingwu, Steven E. Benzley, and Gregory D. Sjaardema
    "Automated Hexahedral Mesh Generation by Virtual Decomposition", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.165-176, October 1995
    keywords:
    • hexahedron
    • mapped meshing
    • spatial decomposition
    • sweeping
    Abstract
    Download Full Paper (Postscript Format)


Benzley, Steven E., Ernest Perry, Karl Merkley, Brett Clark and Greg Sjaardema
    "A Comparison of All-Hexahedral and All-Tetrahedral Finite Element Meshes for Elastic and Elasto-Plastic Analysis", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.179-191, October 1995
    keywords:
    • error bounds
    • finite elements
    • hexahedron
    • tetrahedron
    Abstract
    Download Full Paper (Postscript Format)


Schimpf P.H., D.R. Haynor and Y. Kim
    "Automated Meshing of Complex 3-D Domaind From Classified Images", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.193-204, October 1995
    keywords:
    • adaptivity
    • classified images
    • hexahedron
    Abstract
    Download Full Paper (Postscript Format)


Mitchell, Curtis R., Gary S. Hufford, and Mahesh M. Athavale
    "Automated Semi-Structured Prismatic Grids For Brush Seals Analysis", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.205-215, October 1995
    keywords:
    • advancing front
    • triangle


Price, Mark, Clive Stops and Geoffrey Butlin
    "A Medial Object Toolkit for Meshing and Other Applications", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.219-229, October 1995
    keywords:
    • Application Programmers Interface (API)
    • dimension reduction
    • feature suppression
    • hexahedron
    • medial axis
    • shelling
    Abstract
    Download Full Paper (Postscript Format)


Mitchell, Scott A. and Timmothy J. Tautges
    "Pillowing Doublets: Refining A Mesh to Ensure That Faces Share At Most One Edge", Proceedings, 4th Internatinal Meshing Roundtable, Sandia National Laboratories, pp.231-240, October 1995
    keywords:
    • doublet
    • hexahedron
    • plastering
    • refinement
    • whisker weaving
    Abstract
    Download Full Paper (Postscript Format)


Murdoch, Peter and Steven E. Benzley
    "The Spatial Twist Continuum", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.243-251, October 1995
    keywords:
    • hexahedron
    • spatial twist continuum (STC)
    Abstract


Letcher, John S. and Michael Shook
    "NURBS Considered Harmful for Gridding (Alternative Offered)", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.253-264, October 1995
    keywords:
    • NURBS
    • relational geometry
    Abstract
    Download Full Paper (Postscript Format)


Potyondy, David O., Paul A. Wawrzynek and Anthony R. Ingraffea
    "An Algorithm to Generate Qudrilateral or Triangular Element Surface Meshes in Arbitrary Domains with Aplications to Crack Propogation", International Journal for Numerical Methods in Engineering, John Wiley & Sons, Ltd., Vol 38, pp.2677-2701, 1995
    keywords:
    • crack propagation
    • quadrilateral
    • quadtree
    • triangle
    Abstract


Lee, C.K., and S.H. Lo
    "A New Scheme for the Generation of a Graded Quadrilateral Mesh", Computers and Structures, Pergammon, Vol 52, Num 5, pp.847-857, 1994
    keywords:
    • advancing front
    • quadrilateral
    • triangle
    Abstract


Hitschfeld, N.
    "Algorithms and Data Structures for Handling a Fully Flexible Refinement Approach in Mesh Generation", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.265-276, October 1995
    keywords:
    • data structures
    • refinement
    Abstract
    Download Full Paper (Postscript Format)


Armstrong, C.G., D.J. Robinson, R.M. McKeag, T.S. Li, S.J. Bridgett, R.J. Donaghy and C.A. McGleenan
    "Medials for Meshing and More", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.277-288, October 1995
    keywords:
    • dimension reduction
    • feature suppression
    • mapped meshing
    • medial axis
    • spatial decomposition
    Abstract
    Download Full Paper (Postscript Format)


Dewhirst, Donald, Sreedhar Vangavolu and Harley Wattrick
    "The Combination of Hexahedral and tetrahedral Meshing Algorithms", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.291-304, October 1995
    keywords:
    • Delaunay
    • hexahedron
    • mixed meshing
    • multi-point constraints
    • plastering
    • tetrahedron
    • three-dimensional
    Abstract


Chae, Soo-Won and Jong-Soo Kim
    "Terahedral Meshing Algorithm Using Basic Operators", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.305-318, October 1995
    keywords:
    • advancing front
    • tetrahedron
    Abstract


Garimella, Rao and Mark S. Shephard
    "Tetrahedral Mesh Generation With Mutliple Elements Through the Thickness", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.321-333, October 1995
    keywords:
    • octree
    • tetrahedron
    Abstract
    Download Full Paper (Postscript Format)


Rivara, Maria-Cecilia and Patricio Inostroza
    "A Discussion on Mixed (Longest-Side Midpoint Insertion) Delaunay Techniques for the Triangulation Refinement Problem", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.335-346, October 1995
    keywords:
    • Delaunay
    • refinement
    • triangle
    Download Full Paper (Postscript Format)


Price, M.A. and C.G. Armstrong
    "Hexahedral Mesh Generation by Medial Surface Subdivision: Part I, Solids With Convex Edges", International Journal for Numerical Methods in Engineering, Wiley, Vol 38, Num 19, pp.3335-3359, October 1995
    keywords:
    • convex
    • hexahedron
    • medial axis
    • spatial decomposition


Noel, F, J.C. Leon and P. Trompette
    "A New Approach to Free-form Surface Mesh Control in a CAD Environment", International Journal for Numerical Methods in Engineering, Wiley, Vol 38, Num 18, pp.3121-3142, September 1995
    keywords:
    • CAD
    • refinement
    • smoothing
    • surface meshing


Lu, Ning, Peter R. Eisman
    "Interactive High Quality Grid Generation", Proceedings of NASA Workshop on Surface Modeling, Grid Generation and Related Issues in CFD Solutions, NASA-CP-3291, pp.833-843, May 1995
    keywords:
    • hexahedron
    Abstract


Ala, Rao Seshagiri
    "Performance Anomolies in Boundary Data Structures", IEEE Comuputer Graphics and Applications, IEEE, pp.50-58, March 1992
    keywords:
    • data structures
    • surface mesh
    Abstract


Montgomery, Matthew and Sanford Fleeter
    "A Locally Analytic Technique Applied to Grid Generation by Elliptic Equiations", International Journal for Numerical Methods in Engineering, John Wiley & Sons, Ltd, Vol 38, pp.421-432, 1995
    keywords:
    • finite difference
    • grid-generation
    Abstract


Vanderstraeten, Denis and Roland Keunings
    "Optimized Partitioning of Unstructured Finite Element Meshes", International Journal for Numerical Methods in Engineering, John Wiley & Sons, Ltd., Vol 38, pp.433-450, 1995
    keywords:
    • decomposition
    • frontal method
    • heuristics
    • optimization
    • parallel processing
    Abstract


Lohner, Rainald
    "Mesh Adaptation in Fluid Mechanics", Engineering Fracture Mechanics, Pergammon, Vol 50, Num 5, pp.819-847, 1995
    keywords:
    • adaptivity
    • CFD
    • refinement
    Abstract


Noel, F. J.C. Leon and P. Trompette
    "A Data Structure Dedicated to an Integrated Free-form Surface Environment", Computers and Structures, Pergammon, Vol 57, Num 2, pp.345-355, 1995
    keywords:
    • adaptivity
    • CAD
    • data structures
    • geometric modeling
    • NURBS
    • refinement
    • surface mesh
    Abstract


Yang, H. and D.A. Hoeltzel
    "Automatic Finite Element Mesh Generation Over Intersecting Rigid Body-Movable Subdomains for the Automation of Parametric Conceptual Design", Journal of Mechanical Design, ASME, Vol 116, pp.1049-1057, December 1994
    keywords:
    • parametric design
    • refinement
    • tetrahedron
    Abstract


Dey, Tamal K., Chanderjit L. Bajaj and Kokichi Sugihara
    "On Good Triangulations in Three Dimensions", ACM, ACM, pp.431-441, 1991
    keywords:
    • convex hull
    • quality
    • shape measures
    • tetrahedron
    Abstract


Kwok, W, K. Haghighi and E. Kang
    "An Efficient Data Structure for the Advancing Front Triangular Mesh Generation Technique", Communications in Numericak Methods in Engineering, Vol 11, pp.465-473, 1995
    keywords:
    • advancing front
    • data structures
    • triangle


Pressburger, Yoram and Renato Perucchio
    "A Self-Adaptive FE System Based on Recursive Spatial Decomposition and Multigrid Analysis", International Journal For Numerical Methods in Engineering, John Wiley & Sons, Ltd., Vol 38, pp.1399-1421, 1995
    keywords:
    • adaptivity
    • multigrid
    • recursive subdivision
    • spatial decomposition


Field, David A. and William H. Frey
    "Structural Improvement of Planar Triangulations: Some Constraints and Practical Issues", Communications in Numerical Methods in Engineering, John Wiley & Sons, Ltd., Vol 11, pp.191-198, 1995
    keywords:
    • clean-up
    • relaxation
    • smoothing
    • triangle
    Abstract


Katragadda,P. and I.R. Grosse
    "A Posteriori Error Estimation and Adaptive Mesh Refinement for Combined Thermal-Stress Finite Element Analysis", Computers and Structures, Pergammon, Vol 59, Num 6, pp.1149-1163, 1996
    keywords:
    • adaptivity
    • error estimators
    • refinement
    • thermal analysis
    Abstract


Moitra, Stuti and Anutosh Moitra
    "Considerations of Computational Optimality in Parallel Algorithms for Grid Generation", 5th International Conference on Numerical Grid Generation in Computational Field Simulations, Mississippi State University, pp.753-762, April 1996
    keywords:
    • parallel processing
    Abstract


Gaither, Adam, Dave Marcum, Donna Reese and Nigel Weatherill
    "A Paradigm for Parallel Unstructured Grid Generation", 5th International Conference on Numerical Grid Generation in Computational Field Simmulations, Mississippi State University, pp.731-740, April 1996
    keywords:
    • advancing front
    • decomposition
    • Delaunay
    • parallel processing
    • triangles
    Abstract


Okusanya, T. and J. Peraire
    "Parallel Unstructured Mesh Generation", 5th International Conference on Numerical Grid Generation on Computational Field Simmulations, Mississippi State University, pp.719-729, April 1996
    keywords:
    • parallel processing
    • point insertion
    • triangle
    Abstract


Taniguchi,Takeo, Tomoaki Goda Harald Kasper and Werner Zielke
    "Hexahedral Mesh Generation of Complex Composite Domain", 5th International Conference on Grid Generation in Computational Field Simmulations, Mississippi State University, pp.699-707, April 1996
    keywords:
    • composite domain
    • groundwater
    • hex-from-tet
    • hexahedron
    Abstract


Weiler, F. R. Schindler and R. Schneiders
    "Automatic Geometry-Adaptive Generation of Quadrilateral and Hexahedral Element Meshes for FEM", 5th International Conference on Numerical Grid Generation in Computational Field Simmulations, Mississippi State University, pp.689-697, April 1996
    keywords:
    • data structures
    • grid-based mesh generation
    • hexahedron
    • octree
    • quadtree
    • refinement
    Abstract


Schneiders, R.
    "Refining Quadrilateral and Hexahedral Element Meshes", 5th International Conference on Numerical Grid Generation in Computational Field Simulations, Mississippi State University, pp.679-688, April 1996
    keywords:
    • hexahedron
    • quadrilateral
    • refinement
    Abstract


Taniguchi, Takeo and Hiroki Katagiri
    "New Concept of Hexahedral Mesh Generation For Arbitrary 3D Domain - Block Generation Method -", 5th International Conference on Numerical Grid Generation in Computational Field Simmulations, Mississippi State University, pp.671-678, April 1996
    keywords:
    • hex from primitives
    • hex-from-tet
    • hexahedron
    Abstract


Tautges, Timothy J. and Scott A. Mitchell
    "Progress Report on the Whisker Weaving All-Hexahedral Meshing Algorithm", 5th International Conference on Numerical Grid Generation in Computational Field Simulations, Mississippi State University, pp.659-670, April 1996
    keywords:
    • doublet
    • hexahedron
    • spatial twist continuum (STC)
    • whisker weaving
    Abstract


Hakula, Harri
    "Low-Dispersion Meshes for Scattering Problems", 5th International Conference on Numerical Grid Generation in Computational Field Simulations, Mississippi State University, pp.639-646, April 1996
    keywords:
    • Rebay's method
    • triangle
    Abstract


Yu, Tzu-Yi and Bharat K. Soni
    "NURBS Evaluation and Utilization for Grid Generation", 5th International Conference on Numerical Grid Generation in Computational Field Simulations, Mississippi State University, pp.323-332, April 1996
    keywords:
    • NURBS
    • surface meshing
    Abstract


Tsai, Po-Yu
    "Decomposing Trimmed Surfaces Using the Voronoi Tesselation", 5th International Conference on Numerical Grid Generation in Computational Field Simualtions, Mississippi State University, pp.313-322, April 1996
    keywords:
    • NURBS
    • surface mesh
    • Voronoi
    Abstract


Kumar, Subodh and Dinesh Manocha
    "Dynamic Mesh Generation for Parametric Surfaces", 5th International Conference on Numerical Grid Generation in Computational Field Simulations, Mississippi State University, pp.303-312, April 1996
    keywords:
    • NURBS
    • parametric surfaces
    • surface mesh
    • visualization
    Abstract


Karamete, B. Kaan
    "A Flexible Unstructured Mesh Generation Algorithm Suitable for Block Partitioning", 5th International Conference on Numerical Grid Generation in Computational Field Simulations, Mississippi State University, pp.279-289, April 1996
    keywords:
    • Delaunay
    • parallel processing
    • spatial decomposition
    • tetrahedron
    Abstract


Carpenter V, James G. and D. Scott McRae
    "Adaptation of Unstructured Meshes Using Node Movement", 5th International Conference On Numerical Grid Generation in Computational Field Simulations, Mississippi State University, pp.269-278, April 1996
    keywords:
    • adaptivity
    Abstract


Khamayseh, Ahmed, Frank Ortega and Harold Trease
    "Ray Tracing for Point Distribution in Unstructured Grid Generation", 5th International Conference on Numerical Grid Generation in Computational Field Simulations, Mississippi State University, pp.257-267, April 1996
    keywords:
    • node generation
    • ray tracing
    • tetrahedron
    Abstract


Sharov, Dmitri and Kazuhiro Nakahashi
    "A Boundary Recovery Algorithm for Delaunay Tetrahedral Meshing", 5th International Conference on Numerical Grod Generation on Computational Field Simulations, Mississippi State University, pp.229-238, April 1996
    keywords:
    • boundary-constrained
    • Delaunay
    • tetrahedron
    Abstract


Thompson, Joe F.
    "A Reflection on Grid Generation in the 90s: Trends, Needs and Influences", 5th International Conference on Numerical Grid Generation in Computational Field Simulations, Mississsippi State University, pp.1029-1110, April 1996
    keywords:
    • bibliography
    • classification
    Abstract


Joe, Barry
    "Delaunay Versus Max-Min Solid Angle Triangulations For Three-Dimensional Mesh Generation", International Journal for Numerical Methods in Engineering, John Wiley & Sons, Vol 31, pp.987-997, 1991
    keywords:
    • angle
    • Delaunay
    • max-min solid angle
    • tetrahedron
    • three-dimensional
    Abstract


Gutierrez, M.A. and R. DeBorst
    "An Algorithm of Quadrilateral Mesh Rezoning", FEMIF, October 1995
    keywords:
    • quadrilateral
    • rezoning
    • smoothing


Sarrate J., M.A. Gutierrez and A. Huerta
    "A New Algorithm for Unstructured Quadrilateral Mesh Generation and Rezoning", FEMIF, September 1993
    keywords:
    • quadrilateral
    • rezoning
    • smoothing
    Abstract


Gutierrez, M.A., R. deBorst, J.C.J. Schellekens and L.J. Sluys
    "An Algorithm for Mesh Rezoning with Application to Strain Localization Problems", Computers and Structures, Elsevier Science Ltd., Vol 55, Num 2, pp.237-247, 1995
    keywords:
    • density function
    • rezoning
    • strain localization


Sloan S.W.
    "A Fast Algorithm for Generating Constrained Delaunay Triangulations", Computers and Structures, Pergammon Press Ltd., Vol 47, Num 3, pp.441-450, 1993
    keywords:
    • boundary-constrained
    • Delaunay
    • triangle
    • two-dimensional
    Abstract


Peters, Jorg
    "Curvature Continuous Spline Surfaces Over Irregular Meshes", Computer Aided Geometric Design, Vol 13, pp.101-131, 1996
    keywords:
    • blending
    • geometric continuity
    • interpolation
    • parametric surfaces
    • quadrilateral
    • surface mesh
    • surface reconstruction
    Abstract


Peraire, Jaime, Joaquin Peiro, Luca Formaggia, Ken Morgan and Olgierd C. Zienkiewicz
    "Finite Element Euler Computations in Three Dimensions", International Journal For Numerical Methods in Engineering, John Wiley & Sons, Ltd, Vol 26, pp.2135-2159, 1988
    keywords:
    • advancing front
    • tetrahedron
    • triangles
    Abstract


Min, Weidong, Zesheng Tang, Zhengming Zhang, Yu Zhou and Minzhi Wang
    "Automatic Mesh Generation for Multiply Connected Planar Regions Based on Mesh Grading Propogation", Computer-Aided Design, Elsevier, Vol 28, Num 9, pp.671-681, 1996
    keywords:
    • convex
    • triangle
    Abstract


Zhu, J.Z., O.C. Zienkiewicz, E. Hinton and J. Wu
    "A New Approach to the Development of Automatic Quadrilateral Mesh Generation", International Journal for Numerical Methods in Engineering, John Wiley & Sons, Vol 32, pp.849-866, 1991
    keywords:
    • advancing front
    • clean-up
    • quadrilateral
    Abstract


Talbert, Jeffrey A. and Alan R. Parkinson
    "Development of an Automatic Two-Dimensional Finite Element Mesh Generator Using Quadrilateral Elements and Bezier Curve Boundary Definition", International Journal for Numerical Methods in Engineering, John Wiley & Sons, Vol 29, pp.1551-1567, 1990
    keywords:
    • quadrilateral
    Abstract


George, P.L., F. Hecht and E. Saltel
    "Automatic Mesh Generator with Specified Boundary", Computer Methods in Applied Mechanics and Engineering, North-Holland, Vol 92, pp.269-288, 1991
    keywords:
    • boundary-constrained
    • Delaunay
    • tetrahedron
    • triangle
    • Voronoi
    Abstract


George, P.L., F. Hecht, and E. Saltel
    "Fully Automatic Mesh Generator for 3D Domains of Any Shape", Impact of Comuting in Science and Engineering, Academic Press, Vol 2, pp.187-218, 1990
    keywords:
    • adaptivity
    • boundary-constrained
    • Delaunay
    • tetrahedron
    • Voronoi
    Abstract


Mitchell, Scott
    "A Characterization of the Quadrilateral Meshes of a Surface Which Admit a Compatible Hexahedral Mesh of the Enclosed Volume", 1996
    keywords:
    • hexahedron
    • proof
    Abstract


Turkiyyah, George M., Duane W. Storti, Mark Ganter, Hao Chen and Munikumar Vimawala
    "An accelerated triangulation method for cimputing the skeletons of free-form solid models", Computer-Aided Design, Elsevier, Vol 29, Num 1, pp.5-19, January 1997
    keywords:
    • Delaunay
    • medial axis
    • skeleton-based
    Abstract


Price, M.A., and C.G. Armstrong
    "Hexahedral Mesh Generation by Medial Surface Subdivision: Part II. Solids with Flat and Concave Edges", International Journal for Numerical Methods in Engineering, John Wiley & Sons, Vol 40, pp.111-136, January 1997
    keywords:
    • hexahedron
    • medial axis
    Abstract


Thompson, Joe and Nigel P. Weatherill
    "Aspects of Numerical Grid Generation: Current Science and Art", AIAA-93-3593-CP, pp.1029-1070
    keywords:
    • bibliography
    • classification
    Abstract


Lau, T.S. and S.H. Lo
    "Finite Element Mesh Generation Over Analytical Surfaces", Computers and Structures, Elsevier Science Ltd, Vol 59, Num 2, pp.301-309, 1996
    keywords:
    • advancing front
    • curvature
    • density function
    • parametric surfaces
    • surface mesh
    Abstract


Anastasiou, K. and C.T. Chan
    "Automatic Triangular Mesh Generation Scheme for Curved Surfaces", Communications in Numerical Methods in Engineering, John Wiley & Sons, Ltd, Vol 12, pp.197-208, 1996
    keywords:
    • advancing front
    • surface meshing
    • surface patches
    • triangle
    Abstract


Lohner, Rainald
    "Extensions and Improvements of the Advancing Front Grid Generation Technique", Communications in Numerical Methods in Engineering, John Wiley & Sons, Ltd, Vol 12, pp.683-702, 1996
    keywords:
    • advancing front
    • CAD
    • density function
    • terrain modeling
    • triangle
    • triangulation
    Abstract


Blacker, Ted
    "The Cooper Tool", 5th International Meshing Roundtable, Sandia National Laboratories, pp.13-30, October 1996
    keywords:
    • cooper
    • hexahedron
    • mapped
    • sweeping
    Abstract
    Download Full Paper (Postscript Format)


Bossen, Frank, J. and Paul S. Heckbert
    "A Pliant Method for Anisotropic Mesh Generation", 5th International Meshing Roundtable, Sandia National Laboratories, pp.63-76, October 1996
    keywords:
    • anisotropy
    • bubble
    • sphere packing
    • triangle
    Abstract
    Download Full Paper (Postscript Format)


Butlin, Geoffrey and Clive Stops
    "CAD Data Repair", 5th International Meshing Roundtable, Sandia National Laboratories, pp.7-12, October 1996
    keywords:
    • CAD
    • data repair
    • defeaturing
    • healing
    Abstract
    Download Full Paper (Postscript Format)


Field, David
    "Give me a good mesh", 5th International Meshing Roundtable, Sandia National Laboratories, pp.3, October 1996
    keywords:
    • density
    • metric
    • quality
    Abstract


Frey, Pascal J., Houman Borouchaki and Paul-Louis George
    "Delaunay Tetrahedralization using an Advancing-Front Approach", 5th International Meshing Roundtable, Sandia National Laboratories, pp.31-46, October 1996
    keywords:
    • adaptivity
    • advancing front
    • anisotropy
    • Delaunay
    • tetrahedron
    Abstract
    Download Full Paper (Postscript Format)


Miller, Gary L., Dafna Talmor, Shang-Hua Teng, Noel Walkington and Han Wang
    "Control Volume Meshes using Sphere Packing: Generation, Refinement and Coarsening", 5th International Meshing Roundtable, Sandia National Laboratories, pp.47-62, October 1996
    keywords:
    • coarsening
    • control volume
    • Delaunay
    • refinement
    • sliver
    • sphere packing
    • tetrahedron
    Abstract
    Download Full Paper (Postscript Format)


Rivara, Maria-Cecilia
    "New Mathematical Tools and Techniques for the Refinementand/or Improvement of Unstructured Triangulations", 5th International Meshing Roundtable, Sandia National Laboratories, pp.77-86, October 1996
    keywords:
    • longest edge
    • refinement
    • surface meshing
    • tetrahedron
    • triangle
    Abstract
    Download Full Paper (Postscript Format)


Freitag, Lori A. and Carl Ollivier-Gooch
    "A Comparison of Tetrahedral Mesh Improvement Techniques", 5th International Meshing Roundtable, Sandia National Laboratories, pp.87-106, October 1996
    keywords:
    • metric
    • optimization
    • quality
    • smoothing
    • swapping
    • topology
    Abstract
    Download Full Paper (Postscript Format)


Galtier, Jerome and Paul Louis George
    "Prepartitioning as a way to mesh subdomains in parallel", 5th International Meshing Roundtable, Sandia National Laboratories, pp.107-122, October 1996
    keywords:
    • Delaunay
    • domain decomposition
    • parallel
    • triangle
    Abstract
    Download Full Paper (Postscript Format)


Plaza, Angel and Graham F. Carey
    "About Local Refinement of Tetrahedral Grids based on Bisection", 5th International Meshing Roundtable, Sandia National Laboratories, pp.123-136, October 1996
    keywords:
    • adaptivity
    • bisection
    • refinement
    • tetrahedron
    Abstract
    Download Full Paper (Postscript Format)


Maubach, Joseph M.
    "The Efficient Location of Neighbors for Locally Refined n-Simplicial Grids", 5th International Meshing Roundtable, Sandia National Laboratories, pp.137-156, October 1996
    keywords:
    • bisection
    • neighbors
    • refinement
    • tetrahedron
    Abstract
    Download Full Paper (Postscript Format)


Marcal, Pedro V.
    "Constructive Solid Geometry, The CAD-FEM Connection", 5th International Meshing Roundtable, Sandia National Laboratories, pp.157-168, October 1996
    keywords:
    • CAD
    Abstract
    Download Full Paper (Postscript Format)


Bajaj, Chandrajit L., Edward J. Coyle and Kwun-Nan Lin
    "Surface and 3D Triangular Meshes from Planar Cross Sections", 5th International Meshing Roundtable, Sandia National Laboratories, pp.169-178, October 1996
    keywords:
    • medical
    • surface reconstruction
    • tetrahedron
    • triangle
    Abstract
    Download Full Paper (Postscript Format)


Yamada, Atsushi, Kenji Shimada and Takayuki Itoh
    "Energy-Minimizing Approach to Meshing Curved Wire-Frame Models", 5th International Meshing Roundtable, Sandia National Laboratories, pp.179-194, October 1996
    keywords:
    • bubble
    • energy-minimization
    • sphere packing
    • triangle
    Abstract
    Download Full Paper (Postscript Format)


Hitschfeld, Nancy and Rodrigo Farias
    "1-irregular element tessellation in mixed element meshes for the control volume discretization method", 5th International Meshing Roundtable, Sandia National Laboratories, pp.195-204, October 1996
    keywords:
    • control volume
    • mixed element
    • Voronoi
    Abstract
    Download Full Paper (Postscript Format)


Schneiders, R., R. Schindler and F. Weiler
    "Octree-based Generation of Hexahedral Element Meshes", 5th International Meshing Roundtable, Sa