linux:/home/kevin # dmesg Bootdata ok (command line is root=/dev/hda6 vga=0x317 resume=/dev/hda5 splash=silent) Linux version 2.6.16.13-4-default (geeko@buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 Wed May 3 04:53:23 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002bfd0000 (usable) BIOS-e820: 000000002bfd0000 - 000000002bfde000 (ACPI data) BIOS-e820: 000000002bfde000 - 000000002c000000 (ACPI NVS) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) ACPI: RSDP (v000 FUJ ) @ 0x00000000000f9b70 ACPI: RSDT (v001 FUJ FJNBA00 0x01000611 FUJ 0x00000097) @ 0x000000002bfd0000 ACPI: FADT (v002 FUJ FJNBA00 0x01000611 FUJ 0x00000097) @ 0x000000002bfd0200 ACPI: MADT (v001 FUJ FJNBA00 0x01000611 FUJ 0x00000097) @ 0x000000002bfd0390 ACPI: MCFG (v001 FUJ FJNBA00 0x01000611 FUJ 0x00000097) @ 0x000000002bfd03f0 ACPI: BOOT (v001 FUJ FJNBA00 0x01000611 FUJ 0x00000097) @ 0x000000002bfd0430 ACPI: SSDT (v001 FUJ FJNBA00 0x00000001 INTL 0x02002026) @ 0x000000002bfd52e0 ACPI: OEMB (v001 FUJ FJNBA00 0x01000611 FUJ 0x00000097) @ 0x000000002bfde040 ACPI: DSDT (v001 FUJ FJNBA00 0x00000013 INTL 0x02002026) @ 0x0000000000000000 No mptable found. On node 0 totalpages: 176797 DMA zone: 3124 pages, LIFO batch:0 DMA32 zone: 173673 pages, LIFO batch:31 Normal zone: 0 pages, LIFO batch:0 HighMem zone: 0 pages, LIFO batch:0 ATI board detected. Disabling timer routing over 8254. ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 16 ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 2c000000:d3b80000) Checking aperture... CPU 0: aperture @ 18e2000000 size 32 MB Aperture from northbridge cpu 0 too small (32 MB) No AGP bridge found Built 1 zonelists Kernel command line: root=/dev/hda6 vga=0x317 resume=/dev/hda5 splash=silent bootsplash: silent mode. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. time.c: Detected 795.970 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Memory: 702636k/720704k available (1728k kernel code, 17280k reserved, 767k data, 164k init) Calibrating delay using timer specific routine.. 1595.60 BogoMIPS (lpj=3191217) Security Framework v1.0.0 initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: AMD Turion(tm) 64 Mobile Technology MT-37 stepping 02 checking if image is initramfs... it is Freeing initrd memory: 2445k freed not found! ACPI Error (dswload-0190): [\_SB_.PCI0.SBRG.UAR1] Namespace lookup failure, AE_NOT_FOUND ACPI Exception (psloop-0281): AE_NOT_FOUND, During name lookup/catalog [20060127] ACPI Exception (tbxface-0115): AE_NOT_FOUND, Could not load namespace [20060127] ACPI Exception (tbxface-0122): AE_NOT_FOUND, Could not load tables [20060127] ACPI: Unable to load the System Description Tables Using local APIC timer interrupts. result 12437051 Detected 12.437 MHz APIC timer. testing NMI watchdog ... OK. DMI 2.3 present. NET: Registered protocol family 16 PCI: Using configuration type 1 ACPI: Subsystem revision 20060127 ACPI: Interpreter disabled. PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 Boot video device is 0000:01:05.0 PCI: Transparent bridge - 0000:00:14.4 PCI: Bus #09 (-#0c) is hidden behind transparent bridge #08 (-#09) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently PCI: Using IRQ router default [1002/4377] at 0000:00:14.3 PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0 PCI: Cannot allocate resource region 7 of bridge 0000:00:06.0 TC classifier action (bugs to [email]netdev@vger.kernel.org[/email] cc [email]hadi@cyberus.ca[/email]) PCI-DMA: Disabling IOMMU. PCI: Bridge: 0000:00:01.0 IO window: d000-dfff MEM window: fbf00000-fbffffff PREFETCH window: d8000000-dfffffff PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: fc000000-fe1fffff PREFETCH window: f4000000-f8ffffff PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: fe200000-fe2fffff PREFETCH window: disabled. PCI: Bus 9, cardbus bridge: 0000:08:08.0 IO window: 0000e000-0000e0ff IO window: 0000e400-0000e4ff PREFETCH window: 32000000-33ffffff MEM window: 34000000-35ffffff PCI: Bridge: 0000:00:14.4 IO window: e000-efff MEM window: fe300000-febfffff PREFETCH window: f9000000-faffffff PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:00:06.0 to 64 Simple Boot Flag at 0x6d set to 0x1 IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1213984924.732:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:04.0 to 64 pcie_portdrv_probe->Dev[5a36:1002] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:04.0:pcie00] PCI: Setting latency timer of device 0000:00:06.0 to 64 pcie_portdrv_probe->Dev[5a38:1002] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:06.0:pcie00] vesafb: framebuffer at 0xd8000000, mapped to 0xffffc20000080000, using 6144k, total 65536k vesafb: mode is 1024x768x16, linelength=2048, pages=41 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 47089 bytes,<6>...found (1024x768, 27542 bytes, v3). Console: switching to colour frame buffer device 124x44 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones i8042.c: Detected active multiplexing controller, rev 1.0. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled isa bounce pool size: 16 pages RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 input: PS/2 Mouse as /class/input/input1 input: AlpsPS/2 ALPS GlidePoint as /class/input/input2 input: PC Speaker as /class/input/input3 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Freeing unused kernel memory: 164k freed Write protecting the kernel read-only data: 329k Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ATIIXP: IDE controller at PCI slot 0000:00:14.1 ATIIXP: chipset revision 128 ATIIXP: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: TOSHIBA MK8025GAS, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 128KiB Losing some ticks... checking if CPU frequency changed. hda: 156301488 sectors (80026 MB), CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 < hda5 hda6 hda7 > Probing IDE interface ide1... hdc: HL-DT-ST DVDRAM GMA4082Nj, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Attempting manual resume ReiserFS: hda6: found reiserfs format "3.6" with standard journal ReiserFS: hda6: using ordered data mode reiserfs: using flush barriers ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda6: checking transaction log (hda6) ReiserFS: hda6: Using r5 hash to sort names tg3.c:v3.49 (Feb 2, 2006) PCI: Setting latency timer of device 0000:06:00.0 to 64 ath_hal: module not supported by Novell, setting U taint flag. ath_hal: module license 'Proprietary' taints kernel. ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) eth0: Tigon3 [partno(BCM95751M) rev 4201 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:0b:5d:d3:17:41 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] wlan: module not supported by Novell, setting U taint flag. wlan: 0.8.4.2 (0.9.3.3) ath_pci: module not supported by Novell, setting U taint flag. ath_pci: 0.9.4.5 (0.9.3.3) usbcore: registered new driver usbfs usbcore: registered new driver hub ieee1394: Initialized config rom entry `ip1394' ath_rate_sample: module not supported by Novell, setting U taint flag. ath_rate_sample: 1.2 (0.9.3.3) wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: H/W encryption support: WEP AES AES_CCM TKIP wifi0: mac 10.5 phy 6.1 radio 6.3 wifi0: Use hw queue 1 for WME_AC_BE traffic wifi0: Use hw queue 0 for WME_AC_BK traffic wifi0: Use hw queue 2 for WME_AC_VI traffic wifi0: Use hw queue 3 for WME_AC_VO traffic wifi0: Use hw queue 8 for CAB traffic wifi0: Use hw queue 9 for beacons hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 wlan_scan_sta: module not supported by Novell, setting U taint flag. wifi0: Atheros 5212: mem=0xfe3e0000, irq=5 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[fe3ff800-fe3fffff] Max Packet=[2048] IR/IT contexts=[4/4] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Yenta: CardBus bridge found at 0000:08:08.0 [10cf:1254] ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.2: irq 11, io mem 0xfbefd000 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.16.13-4-default ehci_hcd usb usb1: SerialNumber: 0000:00:13.2 Yenta: ISA IRQ mask 0x0298, PCI irq 5 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff pcmcia: parent PCI bridge Memory window: 0xfe300000 - 0xfebfffff pcmcia: parent PCI bridge Memory window: 0xf9000000 - 0xfaffffff usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ALSA sound/pci/hda/hda_intel.c:516: hda_intel: azx_get_response timeout, switching to single_cmd mode... ALSA sound/pci/hda/patch_si3054.c:256: Link Frame Detect(FDT) is not ready (line status: 0040) ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 11, io mem 0xfbeff000 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.16.13-4-default ohci_hcd usb usb2: SerialNumber: 0000:00:13.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 11, io mem 0xfbefe000 usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.16.13-4-default ohci_hcd usb usb3: SerialNumber: 0000:00:13.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected usb 3-2: new low speed USB device using ohci_hcd and address 2 hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x9 device-mapper: 4.5.0-ioctl (2005-10-04) initialised: [email]dm-devel@redhat.com[/email] dm-netlink version 0.0.2 loaded ohci_hcd 0000:00:13.1: Unlink after no-IRQ? Controller is probably using the wrong IRQ. loop: loaded (max 8 devices) ReiserFS: hda7: found reiserfs format "3.6" with standard journal ReiserFS: hda7: using ordered data mode reiserfs: using flush barriers ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda7: checking transaction log (hda7) ReiserFS: hda7: Using r5 hash to sort names NTFS driver 2.1.26 [Flags: R/W MODULE]. NTFS volume version 3.1. NTFS-fs warning (device hda1): load_system_files(): Unsupported volume flags 0x4000 encountered. NTFS-fs warning (device hda1): load_system_files(): Volume has unsupported flags set. Will not be able to remount read-write. Run chkdsk and mount in Windows. AppArmor: AppArmor (version 2.0-19.43r6320) initialized audit(1213984950.409:2): AppArmor (version 2.0-19.43r6320) initialized NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (2815 buckets, 22520 max) - 296 bytes per conntrack Adding 1060248k swap on /dev/hda5. Priority:-1 extents:1 across:1060248k BIOS EDD facility v0.16 2004-Jun-25, 1 devices found hda_codec: num_steps = 0 for NID=0x8 powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2) powernow-k8: 0 : fid 0x0 (800 MHz), vid 0x16 (1000 mV) powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xe (1200 mV) powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xc (1250 mV) powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xa (1300 mV) cpu_init done, current fid 0x0, vid 0x16 ADDRCONF(NETDEV_UP): eth0: link is not ready bootsplash: status on console 0 changed to on hda_codec: num_steps = 0 for NID=0x8 hda_codec: num_steps = 0 for NID=0x8 tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready NET: Registered protocol family 17 eth0: no IPv6 routers present tg3: eth0: Link is down. tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=169.254.13.215 DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=169.254.13.215 DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=169.254.13.215 DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=169.254.13.215 DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=UDP SPT=1025 DPT=5353 LEN=53 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=169.254.13.215 DST=224.0.0.251 LEN=108 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=88 martian source 255.255.255.255 from 73.132.152.1, on dev eth0 ll header: ff:ff:ff:ff:ff:ff:00:01:5c:22:1c:82:08:00 martian source 255.255.255.255 from 73.132.152.1, on dev eth0 ll header: ff:ff:ff:ff:ff:ff:00:01:5c:22:1c:82:08:00 martian source 255.255.255.255 from 73.132.152.1, on dev eth0 ll header: ff:ff:ff:ff:ff:ff:00:01:5c:22:1c:82:08:00 eth0: no IPv6 routers present SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=169.254.13.215 DST=224.0.0.251 LEN=108 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=88 martian source 255.255.255.255 from 73.132.152.1, on dev eth0 ll header: ff:ff:ff:ff:ff:ff:00:01:5c:22:1c:82:08:00 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=69.140.120.92 DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=69.140.120.92 DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=69.140.120.92 DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=69.140.120.92 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=69.140.120.92 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=69.140.120.92 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=69.140.120.92 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87 eth0: no IPv6 routers present SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=69.140.120.92 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=69.140.120.92 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:0b:5d:d3:17:41:00:01:5c:22:1c:82:08:00 SRC=125.211.198.16 DST=69.140.120.92 LEN=485 TOS=0x00 PREC=0x20 TTL=39 ID=0 DF PROTO=UDP SPT=32962 DPT=1026 LEN=465 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=69.140.120.92 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87 linux:/home/kevin # ifconfig ath0 Link encap:Ethernet HWaddr 00:11:F5:F8:C8:7E UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) eth0 Link encap:Ethernet HWaddr 00:0B:5D:D3:17:41 inet addr:69.140.120.92 Bcast:255.255.255.255 Mask:255.255.248.0 inet6 addr: fe80::20b:5dff:fed3:1741/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2763 errors:0 dropped:0 overruns:0 frame:0 TX packets:672 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:586156 (572.4 Kb) TX bytes:161226 (157.4 Kb) Interrupt:5 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:242 errors:0 dropped:0 overruns:0 frame:0 TX packets:242 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:19332 (18.8 Kb) TX bytes:19332 (18.8 Kb) wifi0 Link encap:UNSPEC HWaddr 00-11-F5-F8-C8-7E-00-00-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:237 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:199 RX bytes:0 (0.0 b) TX bytes:10902 (10.6 Kb) Interrupt:5 linux:/home/kevin # iwconfig lo no wireless extensions. eth0 no wireless extensions. wifi0 no wireless extensions. ath0 IEEE 802.11g ESSID:"" Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:13 dBm Sensitivity=1/1 Retry:off RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=0/70 Signal level=-256 dBm Noise level=-256 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 sit0 no wireless extensions.